Page 241 - Benma | Blue book 5.0

Surfaces, form, contours measuring techn. Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
048670 Accessories MAHR
Order ID Designation
048670.0200 (M1/M2) Printer paper
048670.0210 (M300) Printer paper
048670.0300 (PS10 / PS1 / M300) Software MARSURF EXPLORER
System requirements: operating system WXP
For this product we recommend a training!
For further information, please ask for our special brochure or for advice.
048670.0400 (PS10/PS1/M300) Probe PHT 6-350
048670.0500 (PS10/PS1/M300) Probe PHT 11-100
048670.0600 (PS10/PS1/M300) Probe PHT 3-350
048670.0700 (PS10/PS1/M300) Probe PHTF 0.5-100
048670.0800 (PS10/PS1/M300) Probe extension PHT
048670.0900 (PS10/PS1/M300) Measuring stand ST-D
048670.1000 (PS10/PS1/M300) Measuring stand ST-G, base plate in hard stone
048670.1100 (PS10/PS1/M300) Adapter to drive unit RD18
048670.1200 Fixture on measuring stand ST-D/F/G for feed unit RD18C
049155 Contour measuring instruments ConturoMatic TS
2D coordinate measuring system
Contour measuring instruments of the TS family are 2D coordinate measuring units with detached,
motor controlled X and Z measurement axes. A constant data point distance, irrespective of the slo-
pe of the profile, is guaranteed as a result. The integrated electronic open-loop control system, data
acquisition and control via standard interfaces guarantees long-term reliability and independence
from changing computer hardware. Easy, safe and fully automatic component testing is achievable
thanks to the invariably precise, horizontal position of the calipers.
Versions:
049155.0100: standard, sensor direction down*
049155.0200: same as, also with roughness module*
049155.0300: same as, also with Up & Down module
049155.0400: same as, also with roughness module and Up & Down module
* can be upgraded to 049155.0300 or 049155.0400 with options 049170.9000 or 049170.9010.
Example of use
Features:
Measurement system optical incremental
Measurement speed 0.1...3.0 mm/s
Positioning speed up to 25 mm/s
Measuring point distance 0.5...25 µm
Accuracy ±(0.9+L/100)µm
Accuracy radius ±0.005% of the nominal value at R 12.5 mm
Accuracy distance ±(1.2+L/25)µm
Accuracy angle < 30‘‘
Thread measuring (optional upgrading)
Note:
User training is necessary for this product in order to be able to operate the measuring
unit safely and make optimum use of the software.
For further information, please ask for a special brochure or for consulting.
Package contents:
Y adjustment table and control device
Sensor force scale
Industrial joystick
Analyser W7/64 bit, printer, 19“ TFT
ConturoMatic software
Operating instructions
The different versions will be delivered with the following tracingarms:
049155.0100: Tracingarms 049170.0100 and 049170.0510
049155.0200: Tracingarms 049170.0100, 049170.0510 and 049170.2100
049155.0300: Tracingarms 049170.0100 and 049170.1100
049155.0400: Tracingarms 049170.0100, 049170.1100 and 049170.2100
Appropiates accessories:
043812.9901 set of vices
043810 Miniature vices
049170 Accessories
Order ID Type Range X Range Z Resolution
mm mm µm
049155.0100 TS 250 320 0.033
049155.0200 TS-R 250 320 0.033
049155.0300 TS-DU 250 320 0.033
049155.0400 TS-UDR 250 320 0.033

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 235