Page 1931 - Benma | Blue book 5.0

Presses Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
371160 Band metal shearing tool
for MÄDER presses 370610, 470620 and 371000, for metal cuts, with rod stop.
Order ID Cutting width
mm
371160.0100 50

371170 Direct-acting compressed-air press MÄDER
DA series, constant force over the entire stroke length. With scale ring for fine adjustment of
the impression depth. The stroke length can be read off via the lateral scale and the vernier on
the scale ring. Due to the innovative stroke-length control, an adjustment of the position pick-up
is not necessary, because the positioning magnets always travel to the same end position. Twist-
proof round plunger, hard chrome-plated, runs in Teflon bushes, cylinder pre-lubricated, suitable
for oil-free operation. Measuring tape mounted on the side for quickly reproducing settings when
changing tools. Practically maintenance free double-acting cylinder. Adjustable end position dam-
ping of the cylinder. Low noise, below 75 dB.
Options on request:- standard stroke lengths 40, 60, 100, 120 mm- extensions 250, 300 mm-
bench bore 12H7- press controller - force/distance monitoring Request our detailed tender.
Order ID 371170.0100 371170.0200 371170.0300
Original No. L-DA 850-80-80 DA 1300-80-100 DA 1700-80-100
Compressive force kN 8.5 13 17
Power stroke mm 80 80 80
Capacity mm 80 100 100
Working height mm 65...350 60...285 60...285
Table size mm 157 x 115 185 x 145 185 x 145
Groove width similar DIN 650 mm 12 12 12
H7
H7
H7
Ram bore Ø x depth mm 20 x 25 20 x 25 20 x 25
Ram Ø mm 40 40 40
Air connection A R 3/8“ R 3/8“ R 3/8“
Air consumption/cm cyl. stroke l 1.5 2.1 2.6
Size ratio mm 155 x 280 185 x 320 185 x 320
Upright height mm 570 520 520
Weight kg 37 68 71
Order ID 371170.0400 371170.0500 371170.0600
Original No. DA 2100-80-130 DA 2800-80-130 DA 3400-80-130
Compressive force kN 21 28 34
Power stroke mm 80 80 80
Capacity mm 130 130 130
Working height mm 75...330 75...330 75...330
Table size mm 200 x 190 200 x 190 200 x 190
Groove width similar DIN 650 mm 14 14 14
H7
Ram bore Ø x depth mm 20 x 25 20 x 25 20 x 25
H7
H7
Ram Ø mm 40 40 40
Air connection A R 3/8“ R 3/8“ R 3/8“
Air consumption/cm cyl. stroke l 3 3.7 4.5
Size ratio mm 200 x 385 200 x 385 200 x 385
Upright height mm 580 580 580
Weight kg 92 99 105
371219 Hydraulic standing presses COMPAC
HP-25-2-CH, extremely rugged universal presses with hand hydraulics, high performance, large
operational width and height, self-locking crank for easy, reliable and fast bench adjustment; stan-
dard accessories: 1 pair V supports.
On short notice we can supply 200-1500 kN hand hydraulic, electric hydraulic, pneumatic hydrau-
lic, single and double-action shop presses.
For set of punches, see 371230.0200.
For pressing plate, see 371240.0100.
Order ID 371219.0100
Output kN 250
Stroke mm 145
Piston Ø mm 50
Insert height mm 960
Insert width mm 600
Height mm 1850
Table width (opening) mm 140
Width mm 880
Depth mm 520
Weight kg 150

1920 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch