Page 1926 - Benma | Blue book 5.0

Presses Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
370490 Rack and pinion press FUTURO
Constant pressure over the entire stroke; direct force transfer enables sensitive pressing; ram secu-
red against turning; stroke setting via adjusting screw or stop; lever home position adjustable 360°;
long, honed, high precision ram guide; adjustable return force. Rack and pinion presses are ideal
for press-fitting long parts and for creating long joins.
For replacement springs, see 370572.
Order ID 370490.0100 370490.0200
Pressure kN 1.5 2.5
Stroke mm 40 50
Working height mm 35...235 42...290
Spindle bore mm 10 H7 10 H7
Capacity mm 63 80
Table surface mm 100 x 65 157 x 115
T-slot mm 10 12
Height mm 355 450
Weight kg 8.5 21
1.5
370500 Hand lever press FUTURO
With rack for even force transmission (maximum force can be applied in every lever position); for
punching, embossing, bending, straightening, assembly, bonding, pressing, numbering, etc.
For return spring see 370570.
Order ID 370500.0100 370500.0200
Pressure kN 1.5 2.5
Stroke mm 40 45
Working height mm 75...170 80...220
Spindle bore mm 10 H7 10 H7
Capacity mm 70 90
Table surface mm 115 x 70 160 x 120
T-slot mm 10 12
Height mm 290 390
Weight kg 9.5 22

370530 Hand lever press MÄDER
with rack, therefore constant pressure over the entire stroke, direct force transfer enables sensitive
pressing; ram secured against turning, stroke setting via adjusting screw or stop, lever home posi-
tion adjustable 360°, long, honed, high precision ram guide.
Order ID 370530.0100 370530.0200
Pressure kN 1.5 2.5
Stroke mm 40 50
Working height mm 40...235 42...290
Spindle bore mm 10 H7 10 H7
Capacity mm 63 80
Table surface mm 110 x 65 157 x 115
T-slot mm 10 12
Weight kg 8.5 21

370550 Toggle lever press FUTURO
Factory-set pressure point; press head easily height-adjustable; hardened and ground ram; long,
honed, high precision ram guide; ground press table.
Toggle presses reach their rated force only at the end of the ram stroke. With the toggle
lever mechanism, a relatively low force of about 150 N is enough to produce the high working
pressure of the press. For this reason they are used in applications where the full force of the press is
only required for a short distance at the end of the stroke, e.g. in component assembly, punching,
riveting, embossing, gluing etc.
For replacement springs, see 370572.
Order ID 370550.0100 370550.0200 370550.0300 370550.0400
Pressure kN 5 7.5 15 25
Stroke mm 40 40 60 60
Working height mm 45...220 53...265 43...170 65...295
Spindle bore mm 10 H7 10 H7 10 H7 10 H7
Capacity mm 63 80 100 100
Table surface mm 100 x 65 157 x 115 175 x 140 185 x 145
T-slot mm 10 12 12 12 5
Height mm 355 450 580 570
Weight kg 10 20 43 46

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1915