Page 1919 - Benma | Blue book 5.0

Assembly and disassembly tools Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
457140 Crow bar
Length 380 mm made of pliable spring steel, specially shaped and slotted for efficient nail pulling
and pressing, sharpened, curved ends for effective chiseling and scrapping
Length 600 + 800 mm made of special steel, painted black, with claws and chisel
380 Order ID Length
mm
457140.0100 380
457140.0200 600
600 + 800 457140.0300 800
457155 Pry bar PB Swiss Tools
PB 830, vanadium-extra, nickel-plated and chrome-plated; exceptional toughness and high hard-
ness, for the toughest jobs.
Order ID Length
mm
457155.0100 500
457160 Pry bar BAHCO
Bahco 3680 / 3683, of special steel; size 400-90° especially suitable for tight spaces.
400
Order ID Length angled
mm
457160.0100 400 -
457160.0200 400-90 90°
400-90°
457162 Universal pry bar
cost-effective in chromium-vanadium steel, uniformly hardened over the length and carefully tempered, nickel-
plated; hexagonal material Ø 17 mm.
Order ID Length
mm
457162.0100 400

457164 Roll head pry bar
of chrome-vanadium steel 31 CrV3, nickel-plated, material Ø 14 mm. For loosening rusted parts,
400 driving bearings and bearing shells in and out, installing and removing springs, pins, gears, etc.
Order ID Length
mm
457164.0100 400
457180 Pry bar
rugged construction.
Order ID Length 457180.0400 1000
mm 457180.0600 1200
457180.0100 370 457180.0700 1400
457180.0200 500 457180.0800 1600
457180.0300 760

542010 Scaffold plank scraper
(builder‘s crowbar) made of steel, forged wit hammer.
Order ID Length
mm
542010.0100 550

3 65580 Installation tool set KUKKO
for quick and reliable installation of roller bearings with bore diameters up to 50 mm and
trouble-free installation of bushes, sealing rings, pulleys and similar parts. The set contains 33 dif-
ferent hardened impact rings, 5 impact sleeves, which can be pushed up to 220 mm over the shaft
end in question, and a backlash-free plastic hammer. The combination of impact ring and impact
sleeve necessary for the specific application can be noted from the table attached to the box lid. A
non-positive fit is provided by the installed O-rings. For SKF, FAG, NTN and corresponding bearings
from other manufacturers.
Order ID for outside Ø for inside Ø Original No.
mm mm
365580.0100 26...110 10...50 71

1908 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch