Page 1923 - Benma | Blue book 5.0

Assembly and disassembly tools Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
366676 Screw extractor set KUKKO
5-piece set in plastic box, for removing broken screws. Newly developed model with optimised
engagement geometry. Combines the advantages of the finally-grooved German design with tho-
se of screwing extractors having a sharp edged attack. The advantages are reduced drilling depths
with considerably increased extracting torques.
For individual screw extractors see 366675.
Order ID for Screws for Screws Original No.
mm in
366676.0100 M4...M20 1/8“...3/4“ 49-T-A

366760 Nut splitter KUKKO
for splitting nuts up to grade 6 which are too tight to loosen.
Order ID for spanner width across flats Original No.
mm
366760.0100 4...10 55-0
366760.0200 10...18 55-1
366760.0300 19...27 55-2
366760.0400 27...36 55-3
366770 Hydraulic nut splitter KUKKO
for splitting nuts up to grade 10 which are too tight to loosen, with hydraulics, therefore less force
required.
Order ID for spanner width across flats Original No.
mm
366770.0100 7...22 56-1
366770.0200 22...36 56-2
366800 Tap drill extractor WALTON
for broken-off tap drills;with 3 fingers. The fingers are inserted in the grooves of the broken-off
tap drill by sliding the upper retaining rings and secured by means of the guide bushing. A tap
wrench is then used to move the broken-off piece of the tap drill back and forth until it is loosened
and can be screwed out. The tool is very durable, the fingers are springy.
Order ID Ø Ø inch Order ID Ø Ø inch Order ID Ø Ø inch
mm in mm in mm in
366800.0100 2.6 7/64 366800.0600 6 1/4 366800.1100 16 5/8
366800.0200 3 1/8 366800.0700 8 5/16 366800.1200 20 3/4
366800.0300 3.5 9/64 366800.0800 10 3/8 366800.1300 22 7/8
366800.0400 4 5/32 366800.0900 12 1/2
366800.0500 5 3/16 366800.1000 14 9/16
366810 Tap drill extractor WALTON
for broken tap drills; with 4 fingers. The fingers are inserted in the grooves of the broken-off tap
drill by sliding the upper retaining rings and secured by means of the guide bushing. A tap wrench
is then used to move the broken-off piece of the tap drill back and forth until it is loosened and can
be screwed out. The tool is very durable, the fingers are springy.
Order ID Ø Ø inch Order ID Ø Ø inch Order ID Ø Ø inch
mm in mm in mm in
366810.0100 4 5/32 366810.0400 8 5/16 366810.0700 14 9/16
366810.0200 5 3/16 366810.0500 10 3/8 366810.0800 16 5/8
366810.0300 6 1/4 366810.0600 12 1/2 366810.0900 20 3/4
366820 Replacement finger WALTON
for tap drill extractors with 3 fingers 366800, per piece.
Order ID for Ø M Order ID for Ø M Order ID for Ø M
366820.0100 2.6 366820.0700 6 366820.1200 16
366820.0200 3 366820.0800 8 366820.1300 20
366820.0300 3.5 366820.0900 10 366820.1400 22
366820.0400 4 366820.1000 12
366820.0500 5 366820.1100 14
366830 Replacement finger WALTON
for tap drill extractors with 4 fingers 366810, per piece.
Order ID for Ø M Order ID for Ø M Order ID for Ø M
366830.0100 4 366830.0400 8 366830.0700 14
366830.0200 5 366830.0500 10 366830.0800 16
366830.0300 6 366830.0600 12 366830.0900 20

1912 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch