Page 1915 - Benma | Blue book 5.0

Assembly and disassembly tools Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
365350 Ball bearing puller set simatool
For removal of deep-groove ball bearings without removing the shaft, puller handle made of quality
steel with joint and elastic retaining ring for optimal force transfer to the bearing; case contains 6
sets of puller legs and 2 threaded spindles, selection table for deep-groove ball bearings.
Order ID Original No. for drill hole Ø for bearings
mm
365350.0200 BP 61 10...100 6000...6020; 6200...6217
6300...6313; 6403...6410

365355 Assembly and puller set simatool
50-piece combination kit for fast, precise and safe installation and removal of bearings with bore
diameters from 10 to 30 mm and easy assembly of bushes, sealing rings, pulleys etc. A versatile
installation tool with impact sleeves and fitting impact rings is included. A three-leg puller for deep-
groove ball bearings up to 85 mm bore diameter is available for the removal. Delivered in plastic
case, with selection table and instructions.
Order ID Original No. for drill hole Ø for bearings
mm
365355.0100 MK 10 - 30 10...30 6000...6017; 6200...6211; 6300...6307
365370 Separating and pulling unit kit KUKKO
Universal kit with hydraulic press, delivered in metal case.
Containing:
1 puller, span 90 mm, clamping depth 100 mm (365030.0100)
1 puller, span 160 mm, clamping depth 150 mm (365030.0300)
1 pair pulling hooks, span 200 mm (365035.0100)
1 pair pulling hooks, clamping depth 300 mm (365035.0500)
1 separating unit for ball bearings, clamping range 115 mm
1 hydraulic press, power 15 t, stroke 12 mm (365190.0200)
Order ID Original No. Crate size
mm
365370.0100 K-20-15 449 x 311 x 182

365375 Universal puller tool kit KUKKO
2- and 3-arm universal puller set in L-BOXX, with narrow puller legs for very narrow clearance.
Contents:
1 2-arm puller 20-10-SP, clamping width 120 mm, clamping depth 100 - 350 mm
1 3-arm puller 30-10-SP, clamping width 130 mm, clamping depth 100 - 350mm
1 mechanical pressure spindle 514250l length 250 mm, thread M 14 x 1.5 mm
Order ID Original No. Crate size
mm
365375.0100 K-2030-10-S 442 x 357 x 151

365390 Separating unit KUKKO
for dismantling ball bearings, gears, etc., where there is no space for hooks.
Pulling unit see 365410.
Order ID Clamping width Bolt spacing Original No.
mm mm
365390.0100 5...60 60 17 / 0
365390.0200 12...75 75 17 / 1
365390.0300 22...115 115 17 / 2
365390.0400 25...155 155 17 / 3

1904 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch