Page 1916 - Benma | Blue book 5.0

Assembly and disassembly tools Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
365410 Pulling unit KUKKO
For separating unit 365390, for pulling the dismantled parts, the tension bolts are screwed into
the separating unit; since the separating jaws sit like a ring behind the part to be pulled, the part
is handled gently.
Replacement spindles see 365450; extensions see 365420.
Order ID Clamping width Tension bolt length for puller Original No.
mm mm
365410.0100 40...120 150 365390.0100 18 / 0
365410.0200 65...160 200 365390.0200 18 / 1
365410.0300 80...210 250 365390.0300 18 / 2
365410.0400 100...300 300 365390.0400 18 / 3
365420 Extensions KUKKO
for pulling unit 365410, per pair.
Order ID Original No. Length for puller
mm
365420.0100 19-1-P 100 365410.0100, 365410.0200
365420.0200 19-2-P 100 365410.0300
365420.0300 19-3-P 100 365410.0400
365440 Separating and pulling unit kit KUKKO
Set in L-BOXX, for detaching ball joints, gear wheels etc., where there is no space for a hook.
Contents:
1 Separator 365390
1 Puller 365410
1 pair extensions 365420
Order ID Clamping capacity Crate size Original No.
mm mm
365440.0100 5...60 442 x 357 x 117 17-K
365440.0200 12...75 442 x 357 x 117 17-A
365440.0300 22...115 442 x 357 x 117 17-B
365440.0400 25...155 442 x 357 x 117 17-C
365450 Mechanical pressure spindle KUKKO
To fit KUKKO pullers. Milled from solid stock, specially coated for particularly good sliding proper-
ties along the thread. The bearing-mounted, freely-rotating centre point protects the shaft from
damage. Spindle head with collar prevents the wrench from slipping. The engraved part number
on the spindle head makes re-ordering easier, even after several years.
Care of the pressure spindleKeep the pressure spindle well greased at all times. We recommend
the use of MOLYKOTE thread paste 422080.
Order ID Thread Length Hexagonal Original No. suitable for
mm mm
365450.0800 M12x1.5 130 13 512130 18-0, 44-1, 45-1
365450.0100 M14x1.5 160 17 514160 20-1, 20-2, 20-1-S, 20-10-S, 20-
1+S. 20-10+S, 20-10-V, 44-2, 45-2,
112-20, 113-20, 205-01, 206-01,
207-01, 208-01, 209-01
365450.0200 G 1/2“ 220 22 521220 20-2, 20-20, 20-2+, 20-20+, 20-2-S,
20-20-S, 30-2, 30-20, 30-2+, 60-
20+, 30-2-S, 30-20-S
365450.0600 M18x1.5 175 19 518175 12-2, 18-1, 32-2
365450.0710 G 5/8“ 260 24 523260 12-3, 44-4, 45-4
365450.0500 G 5/8“ 325 24 523325 44-5, 45-5, 113-5, 210-2, 210-3
365450.0310 G 3/4“ 300 27 526300 18-3, 20-3, 20-3+, 20-3-3, 20-3-4,
20-3-5, 20-30, 20-30+, 20-30-3,
20-30-4, 20-30-5, 30-3, 30-3+, 30-
3-3, 30-3-4, 30-3-5, 201-3, 201-4,
202-3, 202-4, 203-3, 203-4, 205-1,
206-1,
207-1, 20-3-S, 20-3+S, 20-30-S, 20-
30+S, 20-30SP,
30-3-S, 30-3+S, 30-3SP
365450.0410 G 1“ 400 36 533400 18-4, 20-4
365460 Inside puller set FACOM
Facom U.49PJ1, for easy and reliable pulling of ball bearings, etc., consisting of:
6 inside pullers 8 - 50 mm
2 bridge yokes
threaded rods and screws
Order ID for drilled holes Size
mm mm
365460.0100 8...50 480 x 240 x 70

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1905