Page 1914 - Benma | Blue book 5.0

Assembly and disassembly tools Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
365243 Internal/external puller FACOM
Legs without tools can be reconfigured for work with 2 or 3 legs, with knurled nut for locking
the puller legs onto the part to be pulled, hooks with return spring ensure self-clamping and self-
centring. Supplied with 3 external puller arms and 3 internal puller arms.
Order ID External clamping Internal clamping width Clamping depth Original No.
width
mm mm mm
365243.0100 7...140 23...130 147 U.306
365243.0200 10...180 50...170 200 U.306-180

10

365250 Accessories FACOM
for external puller 365240.
Order ID Designation 365250.0100/ 365250.0400
365250.0100 Arm for inside pullers, per piece in size 7-140.
365250.0200 Slide hammers for sizes 7-140, for pulling when the spindle cannot be suppor-
ted in the centre. 365250.0200
365250.0300 Hydraulic press, pressing force 30 t for all sizes.
365250.0400 Arm for inside pullers, per piece in sizes 15-170 + 15-250.
365250.0500 Slide hammers for sizes 15-170 + 15-250, for pulling when the spindle cannot
be supported in the centre.
365250.0300

365250.0500
365270 Ball bearing puller set FACOM
Facom U.306J1,
sheet metal box containing 1 outside puller 365240 7-140 mm, 3 inside arms 365250.0100, 1 slide
hammer 365250.0200, 1 puller, 1 set nuts/washers.
Order ID Crate size
mm
365270.0100 718 × 189 × 128
365280 Puller for shaft seals simatool
(Seal Puller) makes it possible to dismantle radial shaft seals in many application cases. Set consis-
ting of slide hammer, with 1 extension each of 100 mm + 300 mm, 50 replacement screws, 20
spacer sleeves
Replacement screws and spacer sleeves see 365282.
Order ID Original No.
365280.0100 SP 50

365282 Accessories
For deep groove ball bearing puller 365280.
Order ID Type Designation
365282.0100 50S Spare screws, pack of 50 pieces
365282.0200 50D Spacer sleeves, pack of 50 pieces

365290 Ball bearing puller set KUKKO
especially for ball bearings which sit on the shaft in a housing, in metal box, containing:
1 puller Type 70-1
3 sets hooks and support rings
Type 711-713
1 puller Type 70-2
2 sets hooks and support rings
Type 721+722
1 puller Type 70-3
2 sets hooks and support rings
Type 731+732
Order ID Original No. for bearings
365290.0100 70 A 6000...6013; 6200...6212
6300...6311; 6403...6408
365300 Ball bearing puller set KUKKO
for ball bearings which sit on the shaft in a housing, access is in the bearing rings, which means
that the ball cage has to be destroyed. After that the ball segments are introduced into the pull
tabs between the inner and outer ring of the bearing corresponding to the balls of the bearing
and set by turning 90°.
Order ID Type Clamping width for bearings
mm
365300.0100 69-A 20 - 100 6004...6010; 6201...6206; 6300...6304
365300.0200 69-B 40 - 130 6207...6211; 6305...6308; 6403...6405
365300.0300 69-C 56 - 220 6021...6032; 6309...6321; 6212...6230; 6406...6417

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1903