Page 2842 - Benma | Blue book 5.0

Parts for machine construction Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
7 66420 Adapter sleeves
Adapter sleeves type H
Adapter sleeves are used to install bearings with a tapered bore on a cylindrical seat. When using
adapter sleeves on a smooth shaft the bearing can be installed at any point on the shaft. However
when using offset shafts together with a support ring the precise axial localisation of the bearing
is possible and in addition to this the removal of the bearing is made simple as well. The adapter
sleeves are supplied complete with nut and locking washer.
Main dimensions: DIN 5415:1993 / ISO 2982-1:1995
Supplementary designations:
C Adapter sleeves for sealed self-aligning ball bearings
Order ID Type d D B H Order ID Type d D B H
mm mm mm mm mm mm mm mm
766420.0100 H 204 17 32 7 24 766420.1700 H 310 C 45 70 13 42
766420.0200 H 205 20 38 8 26 766420.1800 H 211 50 75 12.5 37
766420.0300 H 305 20 38 8 29 766420.1900 H 311 50 75 12.5 45
766420.0400 H 206 25 45 8 27 766420.2000 H 311 C 50 75 13 45
766420.0500 H 306 25 45 8 31 766420.2100 H 212 55 80 12.5 38
766420.0600 H 306 C 25 45 9 31 766420.2200 H 312 55 80 12.5 47
766420.0700 H 207 30 52 9 29 766420.2300 H 313 60 85 13.5 50
766420.0800 H 307 30 52 9 35 766420.2400 H 314 60 92 13.5 52
766420.0900 H 208 35 58 10 31 766420.2500 H 315 65 98 14.5 55
766420.1000 H 308 35 58 10 36 766420.2600 H 316 70 105 17 59
766420.1100 H 308 C 35 58 11 36 766420.2700 H 317 75 110 18 63
766420.1200 H 209 40 65 11 33 766420.2800 H 318 80 120 18 65
766420.1300 H 309 40 65 11 39 766420.2900 H 319 85 125 19 68
766420.1400 H 309 C 40 65 12 39 766420.3000 H 320 90 130 20 71
766420.1500 H 210 45 70 12 35 766420.3100 H 322 100 145 21 77
766420.1600 H 310 45 70 12 42

7 66425 Lock nuts
for adapter sleeves
Lock nuts type KM
Lock nuts are used to install bearings or other components on a shaft and to ease the installation,
as well as the removal, of bearings on withdrawal sleeves.
Main dimensions: DIN 981:1993 / ISO 2982-2:1995
Order ID Type G D B
mm mm
766425.0100 KM 0 M10x0.75 18 4
766425.0200 KM 1 M12x1 22 4
766425.0300 KM 2 M15x1 25 5
766425.0400 KM 3 M17x1 28 5
766425.0500 KM 4 M20x1 32 6
766425.0600 KM 5 M25x1.5 38 7
766425.0700 KM 6 M30x1.5 45 7
766425.0800 KM 7 M35x1.5 52 8
766425.0900 KM 8 M40x1.5 58 9
766425.1000 KM 9 M45x1.5 65 10
766425.1100 KM 10 M50x1.5 70 11
766425.1200 KM 11 M55x2 75 11
766425.1300 KM 12 M60x2 80 11
766425.1400 KM 13 M65x2 85 12
766425.1500 KM 14 M70x2 92 12
766425.1600 KM 15 M75x2 98 13
766425.1700 KM 16 M80x2 105 15
766425.1800 KM 17 M85x2 110 16
766425.1900 KM 18 M90x2 120 16
766425.2000 KM 19 M95x2 125 17
766425.2100 KM 20 M100x2 130 18
766425.2200 KM 21 M105x2 140 18
766425.2300 KM 22 M110x2 145 19

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 2831