Page 2038 - Benma | Blue book 5.0

Glue and sealants, auxiliary equipment Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
415440 Thread sealant LOCTITE, high strength
Type 586
Single-component, anaerobic curing product, for sealing threads up to M56 R 2“, high chemical
resistance, for sealing most fluids, incl. Freon and gas, slow curing, high strength, hard to release;
do not use in conjunction with alloys with high copper content with warm water over +40°C.
Order ID 415440.0100 415440.0200
Bottle ml 50 250
Type 586 586
Final strength at 22 °C h 24 24
for thread max. M56 R 2“ M56 R 2“
Initial curing time at 22 °C min 60...120 60...120
Breakaway torque Nm 15 15
Temperature range °C -55...+150 -55...+150
Viscosity mPa·s 4000...6000 4000...6000
Symbols of danger GHS7
H phrases H319, H335, H412
P phrases P101, P102, P261, P273, P337+P313, P501
415450 Thread sealant / silicone LOCTITE
Type 5331
single-component product curing at room temperature, solvent-free, fluid, low-viscosity pate for
sealing plastic threads, metal/metal and plastic/metal combinations.
Order ID 415450.0100
Tube ml 100
Type 5331
Temperature range °C -55...+150
Viscosity mPa·s 50000
for thread max. M80 R3“
H phrases H315, H318
P phrases P280, P302+P352, P305+P351+P338

415460 Thread sealant LOCTITE, medium strength
Type 561
In stick form, suitable for hard-to-reach bonds or parts which cannot be moved. Recommended
for coarse metal threads that have to be dismantled.
Order ID 415460.0100
Stick g 19
Type 561
Final strength at 22 °C h 72
for thread max. M50 R 3“
Initial curing time at 22 °C min 10
Breakaway torque Nm 2
Temperature range °C -55...+150
Symbols of danger Xi
H phrases R36/37/38
P phrases S23, S26, S24/25
415490 ERGO thread sealant with PTFE, low-strength
Type 4205
Anaerobic curing product for sealing pneumatic and hydraulic screw fittings up to R 3“, filled with
PTFE and has low coefficient of friction, chemical-resistant, conforms to DIN EN 751-1 (DVGW).
NSF/ KTU, DVGW approval.
Order ID 415490.0100 415490.0200
Bottle ml 50 250
Type 4205 4205
Colour of the product white white
Breakaway torque Nm 12 12
Joint max. mm 0.30 0.30
Temperature range °C -55...+150 -55...+150
for thread max. R3“ R3“
Viscosity mPa·s 17500tx 17500tx
Final strength at 25°C h 12 12
415500 Hydraulic sealant ERGO, low strength
Type 4203
Anaerobic curing product for sealing of pneumatic and hydraulic threaded connections up to R
3/4“, can be used for fittings without pre-treatment, easy disassembly, pressure resistant up to
cracking pressure.
Order ID 415500.0100 415500.0200
Bottle ml 50 250
Type 4203 4203
Colour of the product violet violet
for thread max. R 3/4“ R 3/4“
Joint max. mm 0.15 0.15
Breakaway torque Nm 7 7
Temperature range °C -55...+150 -55...+150
Viscosity mPa·s 17000 17000
Final strength at 25°C h 12 12
Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 2027