Page 2033 - Benma | Blue book 5.0

Glue and sealants, auxiliary equipment Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
4 15195 Threadlocker FUTURO medium strength
Type 10-4050
Anaerobic curing product, for securing screw connections, for general purpose use, also suitable
for fine threads, can be dismantled with standard tools.
Order ID 415195.0100
Bottle ml 50
Type 10-4050
for thread max. M12
Joint max. mm 0.15
Breakaway torque Nm 18
Temperature range °C -55...+150
Viscosity mPa·s 180
Final strength at 25°C h 10

4 15200 Threadlocker FUTURO medium strength
Type 10-4052
Anaerobic curing product, for securing screw connections, for general purpose use, with gap-
filling effect due to higher viscosity, especially suitable for stainless and galvanized screws. Rela-
tively insensitive to fouled surfaces, corresponds to DIN EN 751-1 (DVGW). NSF/ DVGW approval/
Order ID 415200.0100
Bottle ml 50
Type 10-4052
for thread max. M36
Joint max. mm 0.25
Breakaway torque Nm 25
Temperature range °C -55...+150
Viscosity mPa·s 2500
Final strength at 25°C h 3
H phrases H412, R52/53
P phrases P273, P501
4 15205 Threadlocker FUTURO high strength
Type 10-4101
Anaerobic curing product, for strong securing of screw connections, for general purpose use.
Especially suitable for screw connections subjected to heavy stress; hard to dismantle. NSF approval.
Order ID 415205.0100
Bottle ml 50
Type 10-4101
for thread max. M20
Joint max. mm 0.15
Breakaway torque Nm 30
Temperature range °C -55...+150
Viscosity mPa·s 700
Final strength at 25°C h 10

4 15220 Retaining compound LOCTITE, high-strength
Type 603
single-component, anaerobic curing product for joining of cylindrical parts, fluid, good co-
verage of the bonding surfaces, for push fit with minimal play and transition fits; the product
will cure even if there is a thin film of oil on the surface which cannot be removed.
Order ID 415220.0050 415220.0100 415220.0200
Bottle ml 10 50 250
Type 603 603 603
Final strength at 22 °C h 24 24 24
Initial curing time at 22 °C min 8 8 8
Joint max. mm 0.10 0.10 0.10
Joint (optimal) mm 0.05 0.05 0.05
Shear strength N/mm² >22.5 >22.5 >22.5
Temperature range °C -55...+150 -55...+150 -55...+150
Viscosity mPa·s 100...150 100...150 100...150
Symbols of danger Xi
H phrases H315, H317, H318, H335, H412
P phrases P101, P102, P261, P273, P280, P305+P351+P338, P302+P352, P333+P313,
P501

2022 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch