Page 2034 - Benma | Blue book 5.0

Glue and sealants, auxiliary equipment Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
415230 Retaining compound LOCTITE, high-strength
Type 648
One-component, anaerobic quick-curing product for joining of cylindrical parts, very good re-
sistance to temperature and solvents, good coverage of the bonding surfaces, for push fit with
minimal play.
Order ID 415230.0100 415230.0200
Bottle ml 50 250
Type 648 648
Final strength at 22 °C h 24 24
Initial curing time at 22 °C min 3 3
Joint max. mm 0.15 0.15
Joint (optimal) mm 0.05 0.05
Shear strength N/mm² >25 >25
Temperature range °C -55...+175 -55...+175
Viscosity mPa·s 400...600 400...600
Symbols of danger Xi
H phrases H315, H317, H318, H335, H412, R36/37/38, R43
P phrases P101, P102, P261, P273, P280, P302+P352, P305+P351+P338, P333+P313,
S24, S26, S37
415240 Retaining compound LOCTITE, medium strength
Type 641
Single-component, anaerobic curing product for joining of cylindrical parts, suitable for bon-
ding of ball and roller bearings, for push fit with small and medium play, can be released with
standard tools.
Order ID 415240.0050 415240.0100 415240.0200
Bottle ml 10 50 250
Type 641 641 641
Final strength at 22 °C h 24 24 24
Initial curing time at 22 °C min 25 25 25
Joint max. mm 0.1 0.1 0.1
Joint (optimal) mm 0.05 0.05 0.05
Shear strength N/mm² >6.5 >6.5 >6.5
Temperature range °C -55...+150 -55...+150 -55...+150
Viscosity mPa·s 400...800 400...800 400...800
Symbols of danger Xn
H phrases H319, H335, H412, R20, R36/37, R52/53
P phrases P101, P102, P261, P273, P337+P313, P501, S2, S23, S25, S26, S46, S51,
S61

415250 Retaining compound LOCTITE, high-strength
Type 638
single-component, anaerobic curing product for joining of cylindrical parts, for push fit with small
to medium play under high dynamic stress, for improving the strength of light press fits, quick
curing, can also be used for very strong to non-releasable thread locking.
Order ID 415250.0050 415250.0100 415250.0200
Bottle ml 10 50 250
Type 638 638 638
Final strength at 22 °C h 24 24 24
Initial curing time at 22 °C min 4 4 4
Joint max. mm 0.25 0.25 0.25
Joint (optimal) mm 0.05 0.05 0.05
Shear strength N/mm² >25 >25 >25
Temperature range °C -55...+150 -55...+150 -55...+150
Viscosity mPa·s 2000...3000 2000...3000 2000...3000
Symbols of danger GHS5, GHS7
H phrases H315, H317, H318, H335, H412
P phrases P101, P102, P261, P273, P280, P302+P352, P305+P351+P338, P333+P313,
P501
415260 Retaining compound LOCTITE, heat resistant
Type 620
Single-component, anaerobic curing product for high-strength joining of cylindrical parts, suitable
for hydraulic, compressed air and water lines, high mechanical strength, temperature-resistant
to +230°C for short periods, +180°C continuously (after additional curing at +180°C for at least
30 minutes, SVGW-tested (gas).
Order ID 415260.0100 415260.0200
Bottle ml 50 250
Type 620 620
Final strength at 22 °C h 24 24
Initial curing time at 22 °C min 80 80
Joint max. mm 0.2 0.2
Joint (optimal) mm 0.05 0.05
Shear strength N/mm² >24 >24
Temperature range °C -55...+230 -55...+230
Viscosity mPa·s 5600...12000th 5600...12000th
H phrases H315, H317, H318, H335
P phrases P101, P102, P261, P280, P302+P352, P333+P313, P337+P313, P501

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 2023