Page 2037 - Benma | Blue book 5.0

Glue and sealants, auxiliary equipment Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
415410 Thread sealant LOCTITE, low strength
Type 511
Single-component, anaerobic curing product, for sealing of threads up to M80 R 3“, easy to
release, quick curing, do not use in conjunction with alloys with high copper content and warm
water over +40°C, SVGW approved (gas).
Order ID 415410.0100 415410.0200
Tube ml 50 250
Type 511 511
Final strength at 22 °C h 24 24
Initial curing time at min 30...40 30...40
22 °C
Breakaway torque Nm 6 6
Temperature range °C -55...+150 -55...+150
Viscosity mPa·s 9000...22000th 9000...22000th
for thread max. M80 R3“ M80 R3“
Symbols of danger GHS7
H phrases H315, H317, H319, H335, H412
P phrases P101, P102, P261, P273, P280, P302+P352, P333+P313, P337+P313, P501
415415 Thread sealant LOCTITE, medium strength
Type 572
single-component, anaerobic curing product, for sealing of large threads up to M80 R 3“,
for hydraulic, compressed air and water lines, slow curing also for passive surfaces and at low
temperatures, medium-strength, can be released using normal tools, gel-like viscosity, immediately
seal-tight at low pressure loads.
Order ID 415415.0100 415415.0200
Tube ml 50 250
Type 572 572
Initial curing time at 22 °C min -180 -180
Final strength at 22 °C h 72 72
Temperature range °C -55...+150 -55...+150
Breakaway torque Nm 7 7
Viscosity mPa·s 14400...28600th 14400...28600th
for thread max. M80 R3“ M80 R3“
H phrases H319
P phrases P101, P102, P337+P313, P501

415420 Thread sealant LOCTITE, medium strength
Type 577
Single-component, anaerobic-curing product, for sealing large threads up to M80 R 3“, for
hydraulic, compressed air and water lines, quick curing also for passive surfaces and at low tem-
peratures, medium-strength, can be detached using normal tools, gel-like viscosity, immediately
seal-tight at low pressure loads; do not use in conjunction with alloys with high copper content
with warm water over +40°C; SVGW approved (gas), NSF registered (P1).
Order ID 415420.0100 415420.0200
Tube ml 50 250
Type 577 577
Final strength at 22 °C h 24 24
for thread max. M80 R3“ M80 R3“
Initial curing time at 22 °C min ~20 ~20
Breakaway torque Nm 11 11
Temperature range °C -55...+150 -55...+150
Viscosity mPa·s 16600...33000th 16600...33000th
Symbols of danger GHS7
H phrases H317, H335
P phrases P101, P102, P261, P280, P333+P313, P501
415430 Thread sealant LOCTITE, medium strength
Type 542
Single-component, anaerobic curing product, for sealing of threads up to M26 R 3/4“, suitable
for hydraulic, compressed air and water lines, medium-strength, can be released using normal
tools, very good chemical resistance, SVGW approved (gas); do not use in conjunction with alloys
with high copper content and warm water over +40°C.
Order ID 415430.0050 415430.0100 415430.0200
Bottle ml 10 50 250
Type 542 542 542
Final strength at 22 °C h 24 24 24
for thread max. M26 R3/4“ M26 R3/4“ M26 R3/4“
Initial curing time at 22 °C min 15...30 15...30 15...30
Breakaway torque Nm 15 15 15
Temperature range °C -55...+150 -55...+150 -55...+150
Viscosity mPa·s 400...800th 400...800th 400...800th
H phrases H319, H335, H412
P phrases P101, P102, P261, P273, P337+P313, P501

2026 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch