Page 2043 - Benma | Blue book 5.0

Glue and sealants, auxiliary equipment Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
4 15690 Flange sealant ERGO, medium strength
Type 4254
Anaerobic curing product for sealing of dimensionally stable flange connections, especially suitable
for aluminium and/or various material combinations, immediately seal-tight against low pressures,
high flexibility.
Order ID 415690.0100 415690.0200
Bottle ml 50 250
Type 4254 4254
Colour of the product red red
Joint max. mm 0.50 0.50
Breakaway torque Nm 15 15
Temperature range °C -55...+150 -55...+150
Viscosity mPa·s 150000tx 150000tx
Tensile strength N/mm² 8.5 8.5
Final strength at 25°C h 72 72
4 15700 Flange sealant ERGO, high strength
Type 4280
anaerobic curing product, for temperature-resistant sealing of surfaces and flanges, seals reliably
against water, gas, oil, LPG and many chemicals.
Order ID 415700.0100 415700.0200
Bottle ml 50 250
Type 4280 4280
Colour of the product red red
Joint max. mm 0.50 0.50
Breakaway torque Nm 18 18
Temperature range °C -55...+200 -55...+200
Viscosity mPa·s 80000tx 80000tx
Tensile strength N/mm² 7 7
Final strength at 25°C h 12 12
Symbols of danger Xi
H phrases R41, R43
P phrases S24/25, S26, S28, S35, S37/39, S45
4 15800 Activator LOCTITE
Type 7240 / 7471
For accelerating and curing of all anaerobic LOCTITE products and adhesives (except for types 312
+ 317), universal and non-corrosive; compatibility with plastics must be tested.
Type 7471 brings about curing which is not too fast
Type 7240 solvent-free, especially for passive surfaces such as stainless steel, aluminium or passi-
vated metals
Order ID Type Spray
ml
415800.0050 7240 90
415800.0100 7471 150
Symbols of danger GHS7
H phrases H317, H412
P phrases P273, P280, P333+P313
150 ml
4 15810 Activator ERGO
Type 4900
for accelerating and curing of all anaerobic ERGO products and adhesives; can be used anywhere
there are difficult conditions which interfere with optimal curing. These can include inactive sur-
faces, very large gaps or extreme surface roughness. The activator can be sprayed on the entire
surface both before bonding (one-sided) or after dispensing the adhesive.
Order ID Spray Type
ml
415810.0100 100 4900
Symbols of danger Xi, F
H phrases R11, R36, R67, R52/53
P phrases S16, S24/25, S26, S35, S7/9

2032 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch