Page 1909 - Benma | Blue book 5.0

Clamps and vices Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
319700 Quick-action screw clamp KANT-TWIST
first-rate industrial design; closes quickly on workpieces of any thickness, hand-tightening is
sufficient, no overwinding or slipping-off of the holding surfaces, solid construction, clamps 40%
stronger than common clamps, but only weighs half as much. Made of aluminium, with parallel
guide.
Order ID Clamping width Working radius Capacity min. Weight
mm mm mm kg
319700.0100 25 17 15 0.03
319700.0200 50 40 35 0.17
319710 Quick-action screw clamp KANT-TWIST
For round parts, top-quality industrial design; clamps quickly onto workpieces of any thick-
ness, hand tightening is enough, no overtightening, gripping surfaces will not „walk off centre“,
solid construction, clamps 40% more strongly than conventional clamps but weighs half as much.
Order ID Type Clamping width Working radius Capacity min. Weight
mm mm mm kg
319710.0200 4 HB 100 75 60 1

319730 Articulated fixing holder FISSO
a „third hand“ in welding, brazing, assembly, bonding, unlimited motion, fastened with a single
action, very stable, consists of articulated stand and 2 Kant-Twist clamps.
Order ID Radius of action Carrying capacity Opening top clamp Opening bottom
clamp
mm N mm mm
319730.0110 450 60 50 75
319730.0210 620 150 75 110

12 / 15
319780 Angle clamp TURNUS
Main body and clamping jaws of high-quality cast iron, clamping jaws on pivot bearing, spindle
with hexagon for powerful clamping. Clamps all profile irons and tubes, even with various thick-
nesses, simultaneously at a right angle.
Order ID Clamping width Weight
mm kg
319780.0100 2 x 90 7.5

319820 Hand vice TURNUS
of forged steel, with bright head, with broad opening.
Order ID Clamping width Jaw width Length Spindle
mm mm mm mm
319820.0100 18 40 100 8 x 74
319820.0200 22 45 120 8 x 74
319820.0300 25 48 130 9 x 82
319820.0400 28 52 145 11 x 95
319820.0500 35 58 160 11 x 95

319825 Hand vice TURNUS
of forged steel, with bright head, with pointed opening.
Order ID Clamping width Jaw width Length Spindle
mm mm mm mm
319825.0100 20 13 120 8 x 74

319830 Machine vice TURNUS
of forged steel, with bright head, with broad opening, with key.
Order ID Clamping width Jaw width Length
mm mm mm
319830.0100 40 65 160
319830.0200 40 70 180
319830.0300 50 80 200
319830.0400 60 90 250

319840 Hand vice with shaft
nickel-plated.
Order ID Jaw width Length
mm mm
319840.0100 16 115

1898 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch