Page 1607 - Benma | Blue book 5.0

Torque tools and torque testers Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
332455 USB adapter cable with software STAHLWILLE
Stahlwille 7759-4, for 332450, to connect transducer to PC, for adjustment and calibration of
torque tools to DIN EN ISO 6789: 2003.
Order ID Type Cable length
m
332455.0200 7759-4 1.5

332600 ISO torque wrench tester NORBAR
Device for testing of torque wrenches in accordance with DIN/ISO 6789. Can be swivelled 90°
so that wrenches can be tested horizontally or vertically. During testing, the wrench is not triggered
by hand, but rather by means of a hand wheel wheel with a large reduction ratio (1:1200). Only in
this manner is it possible to determine the wrench‘s deviation from the setpoint value and repeata-
bility with absolute reliability. Without torque tester and transducer.
Other testers on request.
Order ID Type for torque wrench for spanner length Test adapter square
Nm mm
332600.0100 ISO 1500 1...1500 200...1200 1/4“ 3/8“ 1/2“ 3/4“ 1“
332601 Torque wrench tester NORBAR
Norbar TWL 1500, Device for testing torque wrenches. During testing, the wrench is not trip-
ped by hand, but rather by means of a handwheel. Only in this manner is it possible to determine
the wrench‘s deviation from the setpoint value and repeatability with absolute reliability. Not inclu-
ding torque tester and sensor.
Other testers on request.
Order ID for torque wrench for spanner length
Nm mm
332601.0100 0.5...1500 145...1500

332610 Torque wrench tester STAHLWILLE
Device for testing of torque wrenches. During testing, the wrench is not triggered by hand,
but rather by means of a hand wheel. Only in this manner is it possible to determine the wrench‘s
deviation from the setpoint value and repeatability with absolute reliability. Without torque tester
and transducer.
Other testers on request.
Order ID Type for torque wrench
Nm
332610.0100 7791 0.2...400
332610.0200 7792 25...1100
332614 Extension for calibrating unit STAHLWILLE
Stahlwille 7791-1, for calibrating unit 362613 and 332617.
Order ID for torque wrench Dimensions (LxWxH)
Nm mm
332614.0100 400...1000 673 x 308 x 135

1594 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch