Page 1606 - Benma | Blue book 5.0

Torque tools and torque testers Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
332365 Electronic torque and angle tester NORBAR
Easy-to-operate tester for torque and angle, for clockwise and anticlockwise measurements,
for manual torque tools and for electric and compressed air power drivers. The T-BOX and the ac-
companying TDMS software (Torque Data Management System) together make a complete system
for recording and archiving your torque data. The tester can be used as a mobile (handheld) or
bench-mounted device.
Easy operation via large colour LCD touch screen (145 mm). Direct selection of testing mode via
icons. 8 testing modes are available for testing and calibrating all torque wrenches and drivers,
mechanical screwdrivers, and pulse-type, hydraulic and stall drivers. In the Graph mode, torque/
angle/ variation over time can be viewed graphically and saved.
All results can be presented graphically, in an SPC format, or as an ISO calibration certificate. Nor-
bar SMART transducers are detected automatically. Most transducers with mV/V data output can
be used with suitable programming.
Resolution 5 digits; 12 languages; 56MB memory; 2 USB ports for connection to computer or
printer; 4 transducer ports; TDMS computer software for saving calibration settings, testing and
graphical results; can be used for all torque tools. Calibration compliant with ISO6789:2003; 8
measuring programs; torque and angle display. Delivered in a practical case with UKAS test certi-
ficate (clockwise and anticlockwise), stand, mounting equipment and carry belt, power cable, USB
cable, USB stick drive, TDMS software and instruction manual.
For transducers, see 332380 - 432390.
Order ID Type
332365.0200 T-BOX XL
332380 Static transducer NORBAR FMT
For electronic torque measuring instruments NORBAR TTT and TST (332350, 432360 and 332365),
with automatic transducer detection (SMART version). Accuracy ±0.5% of the measurement value
within 20...100% of the measurement range, up to 20% of the measured value accuracy ±1.0%
(class 2). Supplied with workbench holder and SCS-recognised test certificate (calibrated clockwi-
se).
Types FMT 2...FMT 150 with joint simulator for testing and adjustment of electric and air power
screwdrivers.
Order ID Type Range Calibrated range Square drive
Nm Nm in
332380.0100 FMT 2 0.04...2 0.4...2 1/4“
332380.0200 FMT 10 0.5...10 2...10 1/4“
332380.0300 FMT 25 1.25...25 5...25 1/4“ + 3/8“
332380.0400 FMT 150 7.5...150 30...150 1/2“ + 3/8“
332380.0500 FMT 400 20...400 80...400 1/2“ + 3/4“
332380.0600 FMT 1500 75...1500 300...1500 3/4“ + 1“
332450 Electronic torque tester STAHLWILLE
Stahlwille Sensotork 7707 W, electronic shop tester for clockwise and anticlockwise measu-
rements, compact, can be used as a mobile laboratory (power supply via USB), not sensitive to
transverse forces thanks to flat design. The device can be installed horizontally or vertically. With
the optionally available software 332455 the measurement data can be processed into a DIN EN
ISO 6789 compliant calibration certificate.
Exchangeable transducer, conditioning and digitizing of measurement values in the transducer,
automatic detection, acoustic overload warning, for clockwise and anticlockwise measurement,
various operating modes such as continuous display, peak value, „first peak“ and additional dis-
play of the torque actually applied, accuracy up to ± 0.25% of the specific measurement value,
incl. 230V power supply unit, base and cable (1.5 m) for alternative fastening of the display unit.
Conforms to DIN 51309, class 2, with calibration certificate included.
Order ID Range Square socket Test adapter square
Nm
332450.0120 0.4...20 1/4“ --
332450.0200 2...100 3/8“ 1/4“
332450.0240 4...200 1/2“ 1/4“ 3/8“
332450.0280 8...400 3/4“ 1/4“ 3/8“ 1/2“
332450.0350 25...1100 3/4“ 1/4“ 3/8“ 1/2“
332452 Static transducer STAHLWILLE
Sensotork 7721-7723, for electronic torque tester 332450, high accuracy thanks to measurement
value conditioning and digitisation directly in the transducer. Not sensitive to transverse forces due
to particularly low construction. In the range from 20...100% of the nominal value ± 0.25% display
deviation from the measurement value, up to 20% of the nominal value ±1%. Fulfils DIN 51309,
class 2, incl. calibration certificate.
Order ID Range Square socket
Nm in
332452.0100 0.2...10 1/4“
332452.0120 0.4...20 1/4“
332452.0200 2...100 3/8“
332452.0240 4...200 1/2“
332452.0280 8...400 3/4“
332452.0300 25...1100 3/4“

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1593