Page 1266 - Benma | Blue book 5.0

NC quick-action clamp, machine vices Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
313370 Single vice GRESSEL solinos®
Single clamping system with a mechanical design for small parts. With 100% encapsulation, mo-
dular
interchangeable jaws, multiple jaw programme. Ideally suited for automation with pallet maga-
zines.
• Compact construction, very precise
• Very long guidance of clamping jaws
• Clamping of rough and finishing workpieces
• Clamping force up to 20 kN
• Clamping force adjustable via torque wrench
• Clamping range adjustment without refitting the jaws
• Can be directly integrated into pallets
• Insensitive to chips, high operating safety
Appropriate accessories:
310705 Jaws GRESSEL
310708 Accessories GRESSEL
329140 Hex bit FACOM
331101 Torque wrench NORBAR
Standard accessories: with screws for top jaws, not including jaws.
Note: Clamping width depending on jaw composition.
Order ID Jaw width Clamping Length Height Clamping Weight
capacity force
mm mm mm mm kN kg
313370.0100 65 0...174* 193 82 0...20 5.5
313500 Clamping jaw GRESSEL Vario
With positioning pins
• Clamping jaws for quick and precise clamping of various tools
• Lose support plates can be dispensed with and with them time-consuming cleaning too
• A push of a button and every pin is in position
• Stable and rugged construction
• Closed on all sides, minimal fouling as a result
• Clamping with repeat accuracy
Usable with:
310630 Senso power vice GRESSEL grefors® With mechanical power booster
Order ID Width Type Designation
mm
313500.0100 125 MSA.125.181.01 Clamping jaw Vario, right
313500.0200 125 MSA.125.182.01 Clamping jaw Vario, left
313500.0300 - XNF.10040.004 Stop pin

310705 Jaws GRESSEL

310708 Accessories GRESSEL

310600 Machine vice FUTURO
Mechanical clamping system, steel body with hardened and ground guides, low construction,
clamping repeatability 0.02 mm, with hold-down jaws.
Slot for T-nut: 20mm
Order ID Jaw width Clamping width Length Jaw height Height Weight
mm mm mm mm mm kg
310600.0200 125 150 345 40 80 12.7
310600.0300 150 200 420 50 100 25.6
310600.0400 150 300 520 50 100 29.5
310600.0500 175 400 655 60 118 51.2

310520 Machine vice PFL
fast, precise, powerful, large clamping widths. Rugged main body of cast iron GG 70, support sur-
faces and guides hardened and ground, clamping screw with ball bearing for maximum clamping
forces.
Tolerance ± 0.01 mm.
Appropriate accessories:
310530 Jaws PFL
Supplied together with 1 pair of single-step clamping jaws, 2 chuck keys.
Order ID 310520.0100 310520.0200 310520.0300 310520.0400
Type 70 C 70 L 125 C 125 L
Jaw width mm 70 70 125 125
Clamping width with top jaws mm 170 235 400 700
Clamping width with standard mm 120 185 300 600
jaws
Jaw height mm 30 30 45 45
Support height mm 85 85 120 120
Length mm 240 304 470 770
Weight kg 5.65 6.65 26 36.4
Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1257