Page 1265 - Benma | Blue book 5.0

NC quick-action clamp, machine vices Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
313410 NC high pressure vice ALLMATIC
Type TC:
Mechanical high-pressure vice for horizontal and vertical use.
• Highest precision for your workpiece machining
• The TC vice is ground on all sides
• Preadjustable clamping force in 4 to 11 stages - fine adjustment for sensitive workpieces.
• Maximum clamping force can be achieved with at most 2 rotations
• Preselectable and reproducible clamping forces enable repeatability of the workpiece position
with a deviation of less than 0.01 mm
Designs:
Type 160: the compensation jaw for clamping widths from 0 mm is included in the package
contents
Type 200: the compensation jaw for clamping widths from 0 mm is included in the package
contents
Package contents: High-pressure vice including standard stepped reversible jaws, 4 side clamps,
1 hand crank, 3 pin wrenches.
Other ALLMATIC products available upon request.
Order ID Type Jaw width Clamping width Length Width Height Weight
mm mm mm mm mm kg
313410.0100 90 90 0...217 339 90 80 15
313410.0200 125 125 0...313 483 126 100 35
313410.0300 160 160 (0) 17...433 616 164 115 56
313410.0400 200 200 (0) 17...433 620 202 140 85
310630 Senso power vice GRESSEL grefors®
With mechanical power booster
Mechanical machine device with continuous force adjustment. 10% to 100% of the clamping
force with only 1 turn of the hand crank, always the same final crank position. Fast clamping range
adjustment using positioning rules.
• Clamping time < 1 second
• High repeatability
• Securely locked and vibration-proof due to mechanical locking
• Only one turn of the crank required for full clamping force
• No loss of clamping power because of mechanical force transmission
• Continuous manual adjustment of clamping force up to 60 kN
Appropriate accessories:
310705 Jaws GRESSEL
310708 Accessories GRESSEL
310790 Hydraulic vice jaw KOPAL
313500 Clamping jaw GRESSEL Vario With positioning pins
Package contents: Standard jaws with polished surface, hand crank, 4 side clamps.
Order ID 310630.0100 310630.0200 310630.0300
Jaw width mm 100 125 160
Clamping width mm 161 203 302
Clamping depth mm 35 40 50
Clamping force kN 4...30 4...40 5...60
Length mm 340 400 540
Width mm 112 140 176
Height mm 87 102 128
Weight kg 20 27 55
310500 Machine vice GRESSEL grefors®-M
Without power booster
Mechanical machine vice, without power booster, with direct acting spindle. Robust and precise
design. Fast clamping range adjustment using positioning rules.
• High repeatability
• Clamping force adjustable via torque wrench
Appropriate accessories:
310705 Jaws GRESSEL
310708 Accessories GRESSEL
310790 Hydraulic vice jaw KOPAL
329050 Hex socket KOKEN
331101 Torque wrench NORBAR
Package contents: Standard jaws with polished surface, 4 side clamps, without clamping lever.
Important: The angular drive cannot be used for the grefors-M.
Order ID Jaw width Clamping width Clamping depth Weight Length Width Height
mm mm mm kg mm mm mm
310500.0200 125 0...205 40 24 400 140 102

1256 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch