Page 1264 - Benma | Blue book 5.0

NC quick-action clamp, machine vices Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
310910 NC quick-action vice GRESSEL gripos®-VS
Increased clamping width
Modular-constructed machine vice as a system with tensile clamping. Unique patented lever-action
quick clamping with mechanical power boosting and minimum setup times.
• Clamping < 1 second
• No turning of a crank for clamping and no extra angle drive necessary
• No bending of the main body and therefore extra high machining precision
• Clamping force continuously adjustable
• Cleaning and disassembly in a few seconds‘s
Tolerance for base height: 0 / -0.02 mm
Tolerance for grid holes: ±0.02 mm
Appropriate accessories:
310705 Jaws GRESSEL
310708 Accessories GRESSEL
Package contents: Clamping lever, incl. operating accessories, cover plates, 4 clamping U-bolts
and 2 combination reversible jaws for increased clamping width.
Order ID 310910.0100 310910.0200 310910.0300
Jaw width mm 100 125 160
Clamping width mm 0...245 0...307 0...411
Support height mm 75 100 115
Raster drill holes mm 150 / Ø 12 200 / Ø 16 200 / Ø 16
Clamping force kN 4...30 4...40 4...40
Length mm 374 457 600
Height mm 109 139 164
Weight kg 19 34 63
310901 NC quick-action clamp GRESSEL gripos II®
Uses tension rod principle
Quick-action vice with tension rod, the main body is relieved of direct clamping forces and remains
dimensionally stable - even under extremely high loads. The fixed jaw has a directly opposite mo-
tion. The external workpiece edge always remains in the same position as a reference - even with
very different clamping forces.
• Clamping < 1 second
• No turning of a crank for clamping and no extra angle drive necessary
• No bending of the main body and therefore extra high machining precision
• Clamping force continuously adjustable
• Cleaning and disassembly in a few seconds‘s
Appropriate accessories:
310705 Jaws GRESSEL
310708 Accessories GRESSEL
Package contents: 2 contoured standard jaws, 1 clamping lever and 4 U-bolts.
Order ID 310901.0100 310901.0200
Jaw width mm 100 125
Clamping width mm 0...154 0...205
Support height mm 75 100
Raster drill holes mm 150 / Ø 12 200 / Ø 16
Clamping force kN 4...30 4...40
Length mm 375 460
Height mm 110 140
Weight kg 19 34
313400 NC high pressure vice ALLMATIC
Type LC
Mechanical high-pressure vice for horizontal use.
• Highest repeatability for your workpiece machining
• 4 to 11 preadjustable clamping force stages
• The maximum clamping force can be achieved with at most 2 rotations
• Preselectable and reproducible clamping forces enable repeatability of the workpiece position
with a deviation of less than 0.01 mm
Designs:
Type 160: the compensation jaw for clamping widths from 0 mm is included in the package
contents
Type 200: the compensation jaw for clamping widths from 0 mm is included in the package
contents
Package contents: High-pressure vice including standard stepped reversible jaws, 4 side clamps,
1 hand crank, 3 pin wrenches.
Other ALLMATIC products available upon request.
Order ID Type Jaw width Clamping width Length Width Height Weight
mm mm mm mm mm kg
313400.0100 90 90 0...217 339 90 80 15
313400.0200 125 125 0...313 483 126 100 35
313400.0300 160 160 (0) 17...433 616 164 115 56
313400.0400 200 200 (0) 17...433 616 164 115 60

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1255