Page 1271 - Benma | Blue book 5.0

Multiple vices Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
3 11205 Modular multiple vice set TRIAG POWER CLAMP Set B
The multiple clamping system enables precise positioning of the clamping and stop modules due
to ground teeth on the base rail. Only a single transversely integrated spindle is used for fastening
to the rail; the spindle is accessible from both sides. The clamping module is pulled down onto the
base rail by two shoes on each side with a force of 150kN. Clamping and top modules are availa-
ble in various nominal widths. This means that workpieces with various widths can be machined
optimally from three sides.
With continuous pull-down jaws, therefore larger usable width.
Set consisting of: Base rail, stop and clamping modules, workpiece stops and top jaws.
Order ID Length Working width Support height Jaw height Clamping stroke Clamping modules Width Weight
mm mm mm mm mm mm kg
311205.0100 450 94 35 34 3.8 4 80 16.1
311205.0200 500 94 35 34 3.8 4 80 17.1
311205.0300 550 94 35 34 3.8 5 80 19.4
311205.0400 600 94 35 34 3.8 5 80 20.4
311205.0500 650 94 35 34 3.8 6 80 22.8
3 11210 Modular multiple vice set TRIAG POWER CLAMP Set C
The multiple clamping system enables precise positioning of the clamping and stop modules due
to ground teeth on the base rail. Only a single transversely integrated spindle is used for fastening
to the rail; the spindle is accessible from both sides. The clamping module is pulled down onto the
base rail by two shoes on each side with a force of 150kN. Clamping and top modules are availa-
ble in various nominal widths. This means that workpieces with various widths can be machined
optimally from three sides.
With offset clamping and stop modules, thus better access to the workpiece.
Set consisting of: Base rail, stop and clamping modules, workpiece stops and top jaws.
Order ID Length Working width Support height Jaw height Clamping stroke Clamping modules Width Weight
mm mm mm mm mm mm kg
311210.0100 450 40 35 34 3.8 4 80 14.4
311210.0200 500 40 35 34 3.8 4 80 15.4
311210.0300 550 40 35 34 3.8 5 80 17.3
311210.0400 600 40 35 34 3.8 5 80 18.3
311210.0500 650 40 35 34 3.8 6 80 20.4

1262 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch