Page 1259 - Benma | Blue book 5.0

Toggle clamps, pneumatic clamping ele- Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
262580 Hook type toggle clamp horizontal AMF

Double shackle
Design
No. 6848HNI, made of stainless steel, polished. Rivet running in greased bearing bushes. Ergo-
nomic handgrip of red, oil-resistant plastic.
Scope of supply: With counter catch.
Order ID Size F1 Height Length Travel adjust-
ment
kN mm mm mm
262580.0100 2 1.6 47 156 32
262580.0200 3 3.2 70 210 42
262580.0300 4 7 94 270 55
262600 Push-pull type toggle clamp AMF

With small angle base
Tension and pressure toggle clamp
Design
No. 6841 NI, made of stainless steel, polished. Long push rod guide with fastening thread and
nut. Bearing positions greased. Handgrip made of red, oil-resistant plastic. Hand lever can be rota-
ted into any angle to the base surface.
Scope of supply: Complete with stainless steel pressing bolt.
Order ID Size F1 F2 Height Length Screw
kN kN mm mm
262600.0100 0 0.8 0.8 47 66 M4 x 20
262600.0200 3 2.5 2.5 110 140 M8 x 35
262620 Push-pull type toggle clamp AMF

Short design
Tension and pressure toggle clamp
Design
AMF 6844 NI, made of stainless steel, polished. Long push rod guide with fastening thread and
nut, dowel screws glued to the thread. Ergonomic handgrip of red, oil-resistant plastic.
Application
This push od clamping device can be attached to sheet-metal walls or screwed in to device bodies
with front-side thread.
Scope of supply: Complete with stainless steel pressing bolt.
Order ID Size F1 F2 Height Length Screw
kN kN mm mm
262620.0100 2 1 1 76 70 M6 x 25
262620.0200 3 2.5 2.5 128 110 M8 x 35
262620.0300 5 4 4 142 175 M12 x 50

262800 Vertical pneumatic toggle clamp AMF
No. 6820F, zinc-plated and passivated, stainless steel rivet, bearing positions greased.
Design
With Festo pneumatic cylinder, double-acting, anodised and mounted ready-to-connect. Magnetic
piston for end-position monitoring.
*Vn: Air consumption per double-stroke in litres at 6 bar.
Scope of supply: Complete with tempered, zinc-plated pressing bolt.
Order ID Size Height Length F1 F2 F3 F4 F5 Screw Vn
mm mm kN kN kN kN kN l
262800.0100 1 84 136 0.8 1.1 0.2 0.3 0.1 M5 x 30 0.08
262800.0200 2 104 162 1 1.2 0.7 1 0.3 M6 x 35 0.26
262800.0300 3 152 178 1.4 2.5 0.65 1.1 0.5 M8 x 45 0.35
262800.0400 4 189 214 2 3 1.5 2.2 0.75 M8 x 65 0.8

1250 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch