Page 1179 - Benma | Blue book 5.0

Collet chucks, clamping nuts, accessories Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
239120 Tap drill pincers PCM
DIN 6499
With length compensation
Utilisation: The most rational and economical solution for your machines, for which you only need
the axial length compensation of the pincers to cut thread.
Application: To cut thread, set the machine feed to 95% (small thread) to 99% (large thread) of
the pitch. As a result, the tap drill is located in the compensation path of the tap drill pincers at the
time of spindle reverse. The return traverse must take place with 100% pitch value.
Designs:
2.24 mm: valid only for long shaft
Order ID Type D1 Extract E Order ID Type D1 Extract E
mm mm mm mm
239120.0100 ET1-12 1.4 5.5 239120.4600 ET1-20 6.3 7
239120.0200 ET1-12 1.6 5.5 239120.4700 ET1-20 7 7
239120.0300 ET1-12 1.8 5.5 239120.4800 ET1-25 2.5 8
239120.0400 ET1-12 2 5.5 239120.4900 ET1-25 2.8 8
239120.0500 ET1-12 2.2 5.5 239120.5000 ET1-25 3 8
239120.0600 ET1-12 2.24 5.5 239120.5100 ET1-25 3.15 8
239120.0700 ET1-12 2.5 5.5 239120.5200 ET1-25 3.5 8
239120.0800 ET1-12 2.8 5.5 239120.5300 ET1-25 3.55 8
239120.0900 ET1-12 3 5.5 239120.5400 ET1-25 4 8
239120.1000 ET1-12 3.15 5.5 239120.5500 ET1-25 4.5 8
239120.1100 ET1-12 3.5 5.5 239120.5600 ET1-25 5 8
239120.1200 ET1-12 3.55 5.5 239120.5700 ET1-25 5.5 8
239120.1300 ET1-16 1.4 7 239120.5800 ET1-25 5.6 8
239120.1400 ET1-16 1.6 7 239120.5900 ET1-25 6 8
239120.1500 ET1-16 1.8 7 239120.6000 ET1-25 6.3 8
239120.1600 ET1-16 2 7 239120.6100 ET1-25 7 8
239120.1700 ET1-16 2.2 7 239120.6200 ET1-25 8 8
239120.1800 ET1-16 2.24 7 239120.6300 ET1-25 9 8
239120.1900 ET1-16 2.5 7 239120.6400 ET1-25 10 8
239120.2000 ET1-16 2.8 7 239120.6500 ET1-32 4.5 10
239120.2100 ET1-16 3 7 239120.6600 ET1-32 5 10
239120.2200 ET1-16 3.15 7 239120.6700 ET1-32 5.5 10
239120.2300 ET1-16 3.5 7 239120.6800 ET1-32 5.6 10
239120.2400 ET1-16 3.55 7 239120.6900 ET1-32 6 10
239120.2500 ET1-16 4 7 239120.7000 ET1-32 6.3 10
239120.2600 ET1-16 4.5 7 239120.7100 ET1-32 7 10
239120.2700 ET1-16 5 7 239120.7200 ET1-32 8 10
239120.2800 ET1-16 5.5 7 239120.7300 ET1-32 9 10
239120.2900 ET1-16 5.6 7 239120.7400 ET1-32 10 10
239120.3000 ET1-16 6 7 239120.7500 ET1-32 11 10
239120.3100 ET1-16 6.3 7 239120.7600 ET1-32 11.2 10
239120.3200 ET1-20 2.2 7 239120.7700 ET1-32 12 10
239120.3300 ET1-20 2.24 7 239120.7800 ET1-32 12.5 10
239120.3400 ET1-20 2.5 7 239120.7900 ET1-40 6 13
239120.3500 ET1-20 2.8 7 239120.8000 ET1-40 6.3 13
239120.3600 ET1-20 3 7 239120.8100 ET1-40 7 13
239120.3700 ET1-20 3.15 7 239120.8200 ET1-40 8 13
239120.3800 ET1-20 3.5 7 239120.8300 ET1-40 9 13
239120.3900 ET1-20 3.55 7 239120.8400 ET1-40 10 13
239120.4000 ET1-20 4 7 239120.8500 ET1-40 11 13
239120.4100 ET1-20 4.5 7 239120.8600 ET1-40 11.2 13
239120.4200 ET1-20 5 7 239120.8700 ET1-40 12 13
239120.4300 ET1-20 5.5 7 239120.8800 ET1-40 12.5 13
239120.4400 ET1-20 5.6 7 239120.8900 ET1-40 14 13
239120.4500 ET1-20 6 7 239120.9000 ET1-40 16 13

239200 Tightening nut REGO-FIX Hi-Q/ERC
DIN 6499
Sealed
Application: For clamping tools with internal coolant feed in combination with gaskets DS/ER,
with drawing device.
Usable with:
Sealed 233300 Collet chuck REGO-FIX
239060 Assortment of collet chucks REGO-FIX ER DIN 6499
Order ID Type A B Thread SW Image
mm mm mm
239200.0100 Hi-Q/ERC 16 28 22.5 M22 x 1.5 25 1
239200.0200 Hi-Q/ERC 20 34 24 M25 x 1.5 30 1
239200.0300 Hi-Q/ERC 25 42 25 M32 x 1.5 - 2
239200.0400 Hi-Q/ERC 32 50 27.5 M40 x 1.5 - 2
239200.0500 Hi-Q/ERC 40 63 30.5 M50 x 1.5 - 2

1170 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch