Page 1122 - Benma | Blue book 5.0

Shrink-fit devices, Shrink-fit chuck Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch

234310 Shrink-fit chuck DIEBOLD JetSleeve
DIN 69871, Form AD, balanced for 12,000 rpm.
Reinforced version for heavy cutting.
Application: Shrink-fit chuck with jet sleeve for efficient cutting of even deep ribs and cavities.
Longer tool lifetimes and higher surface qualities due to optimal chip evacuation and cooling.
Suitable for all media operating with emulsion, air and oil-air.
Appropriate accessories:
234560 Accessories for shrink-fit devices Ring wrenches
Package contents: Includes cooling sleeve and drilled-through stop screw. Key not included.
Order ID Cone d A D D2 l1 SW g V
mm mm mm mm mm mm mm mm
234310.0100 SK 40 8 80 29 24 36 27 M6 17
234310.0200 SK 40 10 80 34 28 42 32 M8x1 17
234310.0300 SK 40 12 80 38 33 47 36 M10x1 17
234310.0400 SK 40 16 80 42 38 50 40 M12x1 17
234300 Shrink-fit chuck DIEBOLD JetSleeve
DIN 69871, form AD, balanced for 12,000 rpm.
Type TSF, slim version.
Application: Shrink-fit chuck with jet sleeve for efficient cutting of even deep ribs and cavities.
Longer tool lifetimes and higher surface qualities due to optimal chip evacuation and cooling.
Suitable for all media operating with emulsion, air and oil-air.
Appropriate accessories:
234560 Accessories for shrink-fit devices Ring wrenches
Package contents: Includes cooling sleeve and drilled-through stop screw. Key not included.
Order ID Cone d A D D2 l1 SW g V
mm mm mm mm mm mm mm mm
234300.0100 SK 40 3 80 20 15 15 19 M6 9
234300.0200 SK 40 4 80 20 15 15 19 M6 9
234300.0300 SK 40 5 80 20 15 20 19 M6 9
234300.0400 SK 40 6 80 27 21 36 25 M6 9
234300.0500 SK 40 8 80 27 21 36 25 M6 9
234300.0600 SK 40 10 80 32 24 42 30 M8x1 9
234300.0700 SK 40 12 80 32 24 47 30 M10x1 7
234300.0800 SK 40 16 80 34 27 50 32 M12x1 11
230200 Shrink chuck DIEBOLD-Thermogrip
DIN 69871, Form AD.
Balanced for 18000 rpm.
Use
Very-precise clamping of mill cutting tools with cylinder shaft. Tool shafts according to DIN 6335
Form HA, HB and HE and DIN 1835 Form A and B with shaft tolerance h6 and Ra < 0.3 µm.
Appropriate accessories:
239720 Cone cleaner
Scope of supply: With perforated stop screw.
Order ID Cone d1 A d2 d3 l1 l2 G V
mm mm mm mm mm mm mm
230200.0100 SK 40 6 80 20 27 36 45 M5 10
230200.0200 SK 40 8 80 20 27 36 45 M6 10
230200.0300 SK 40 10 80 24 32 42 50 M8x1 10
230200.0400 SK 40 12 80 24 32 47 50 M10x1 10
230200.0500 SK 40 14 80 27 34 47 50 M10x1 10
230200.0600 SK 40 16 80 27 34 50 50 M12x1 10
230200.0700 SK 40 18 80 33 42 50 57 M12x1 10
230200.0800 SK 40 20 80 33 42 52 57 M16x1 10
230200.0900 SK 40 25 100 44 50 58 38 M16x1 10

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1113