Page 2426 - Benma | Blue book 5.0

Operating material and operating supplies Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
319250 Ceramic disc magnet
Hard ferrite magnet, isotropic, magnetised on one side, maximum operating temperature 250°C.
Other dimensions available upon request.
Order ID Ø Toleranz 1 Height Toleranz 2 Lifting force
mm mm N
319250.0250 14 ±0.3 3 ±0.2 3.0
319250.0350 14 +0.1/-0.4 5 ±0.2 4.0
319250.0510 20 0/-0.55 5 ±0.2 6.5
319250.0610 25 +0.2/-0.7 5 ±0.2 10.0
319250.0650 30 +0.2/-0.8 5 ±0.2 12.0
319260 Ceramic disc magnet
Hard ferrite magnet, anisotropic, axially magnetised maximum operating temperature 250°C.
Other dimensions available upon request.
Order ID Ø Toleranz 1 Height Toleranz 2 Lifting force
mm mm N
319260.0150 4 0/-0.06 4 ±0.05 1.0
319260.0210 8 0.3 4 ±0.1 1.7
319260.0310 10 0.3 5 ±0.1 2.8
319260.0410 13 0/-0.25 8 ±0.1 5.0
319260.0510 20 0.5 6 ±0.1 6.0
319260.0610 45 0.9 9 ±0.1 23.0

319270 Disc magnet
Material: Neodymium (NdFeB), surface galvanised, maximum temperature for use 80°C.
Order ID Ø Height Adhesive strength Order ID Ø Height Adhesive strength
mm mm N mm mm N
319270.0100 4 2 3.0 319270.0550 12 3 21.0
319270.0200 5 2 5.0 319270.0650 12.6 6.3 33.0
319270.0300 6 3 7.5 319270.0720 15 5 39.0
319270.0380 8 4 13.0 319270.0820 20 5 45.0
319270.0450 8 5 14.5 319270.0840 25 2.7 35.0
319270.0500 10 3 15.0 319270.0900 25 5 55.0
319270.0520 10 5 21.0
319280 Block magnet
Material: Neodymium (NdFeB), surface galvanised, maximum temperature for use 80°C.
Order ID Length Width Height Adhesive strength
mm mm mm N
319280.0050 5 5 1.5 4.0
319280.0120 5 5 3 7.0
319280.0180 8 5 3 10.0
319280.0250 10 10 6 30.0
319280.0350 13 7 2.5 15.0
319280.0470 15 15 5 36.0
319280.0550 18.5 8.3 4.3 20.0
319280.0650 20 10 5 44
319280.0680 26 21 4.5 75.0
319280.0750 35 16 5 80.0
319280.0770 36 15 10 140.0
319280.0900 50 32 5 180.0
319290 Rod magnet
Material: AlNiCo, ground, max. operating temperature 450°C.
Other dimensions, rectangular magnets and cylinder magnets with drilled hole on request.
Order ID Ø Length Adhesive strength Order ID Ø Length Adhesive strength
mm mm N mm mm N
319290.0100 3 15 1.2 319290.0490 8 24 8
319290.0190 4 16 2.5 319290.0600 10 30 11
319290.0300 5 20 4 319290.0700 12 40 18
319290.0400 6 20 5.5
319300 Cylindrical bar magnet
Alnico, red paint finish, max. working temperature 500°C.
Order ID Height Width Length Adhesive strength
mm mm mm N
319300.0100 10 5 20 6
319300.0200 12.5 5 40 15
319300.0300 15.5 10 75 14

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 2415