Page 2425 - Benma | Blue book 5.0

Operating material and operating supplies Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
319200 Slip-proof magnetic flat grip
Rubber-sheathed magnet system, black, with threaded bush. Material: Neodymium-iron-boron
(NdFeB). These high-energy magnetic systems are especially suitable for steel sheets with a coated
surface, to avoid scratching. The special type of rubber allows a high shearing force. Max. operating
temperature 60°C.
Version with threaded stud on request.
Order ID Ø Height Thread Hole Adhesive
strength
mm mm mm N
319200.0070 31 6 M4 x 5.5 - 75
319200.0100 43 6 M4 x 4.5 - 85
319200.0200 66 8.5 M5 x 6.5 - 180
319200.0300 88 8.5 M8 x 8.5 - 420
319210 Cup magnet
Slip-proof magnetic flat grip with threaded stud. Material: Hard ferrite, shielded, surface galva-
nised. Recommended operating temperature: up to 100°C; max. operating temperature: 200°C.
Order ID Ø Height Base height Thread Adhesive strength
mm mm mm N
319210.0100 10 11.5 4.5 M3 4
319210.0200 13 11.5 4.5 M3 10
319210.0300 16 11.5 4.5 M3 18
319210.0400 20 13 6 M3 30
319210.0500 25 15 7 M4 40
319210.0600 32 15 7 M4 80
319210.0700 57 18.5 10.5 M6 280
319210.0800 63 29 14 M6 350
319220 Button magnet
With a divided adhesive surface and through-hole for mounting. Material: AlNiCo 500, painted
red. Max. operating temperature: Magnet 450°C, paint 300°C. For positioning, holding and for
laboratory purposes.
Order ID Ø Height Hole Slot width Adhesive strength
mm mm mm mm N
319220.0100 12.7 9.5 4.4 4 7
319220.0200 19.1 12.7 4.8 5.6 19
319220.0300 25.4 15.9 4.8 5.6 34
319220.0400 31.8 25.4 7.1 7.9 48
319230 U-magnet
Bridge-shaped magnet with high adhesive force and through-hole for mounting. Material: AlNiCo
500, painted red. Max. operating temperature: magnet 450°C, paint 300°C. For lifting, positio-
ning, holding, aligning, etc.
Order ID Length Width Height Hole Adhesive strength
mm mm mm mm N
319230.0700 319230.0150 22 25 17 7 45
319230.0200 28 8 25 5.2 20
319230.0300 30 20 20 5.2 45
319230.0400 40 25 25 5 90
319230.0500 45 30 30 5 118
319230.0700 69.9 57.2 41.3 7.9 370
319242 Permanent magnetic pedestal
Magnetic base, equipped with strong permanent magnet and rotary switch, switchable on/off,
with 2 magnetic surfaces, prismatic and flat.
Order ID Length Width Height Adhesive strength
mm mm mm N
319242.0100 65 50 55 800

319240 Magnetic base
WKP, extremely strong, non-switchable magnet, in aluminium housing, possible to cut additional
threaded holes in accordance with sketch, requires iron surface at least 3 mm thick.
Order ID Length Width Height Thread Adhesive strength for 10 Max. temperature
mm iron
mm mm mm N °C
319240.0100 66 50 44 M8 x 12 1000 80

2414 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch