Page 2423 - Benma | Blue book 5.0

Operating material and operating supplies Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
319080 Magnetic foil
of plastoferrite, brown, not acid-resistant, magnetised on one side.
Other dimensions on request.
Order ID Length Width Thickness Lifting force
mm mm mm N/cm²
319080.0100 222 30 3 0.7
319080.0200 450 150 1.5 0.6
319090 Magnetic foil
of plastoferrite, brown, not acid-resistant, magnetised on one side.other side self-adhesive.
Other dimension on request.
Order ID Length Width Thickness Lifting force
mm mm mm N/cm²
319090.0100 222 30 3 0.7
319090.0200 450 150 1.5 0.6
319101 Metal strip MEMOSTRIP
Coated white, with self adhesive PE foam on the back for application to almost any substrate. For
hanging up notes, drawings, etc. quickly and cleanly using magnets.
Magnetic clamps, see 319000 - 419040.
Order ID Length Width
mm mm
319101.0100 500
319101.0200 1000
319121 Transparent magnetic pocket
Transparent pocket on full-surface magnetic film, narrow side open.
Order ID Internal size
mm
319121.0100 147 x 105
319121.0200 210 x 153
319121.0300 230 x 100

319140 Ceiling magnet
Round, with open hook, steel jacket painted white. For hanging up informational and promoti-
onal signs or as an auxiliary magnet when positioning lines. The values of the maximum adhesive
forces are based on measurements under optimal conditions, i.e. the plate must be 10 mm thick,
made of Fe metal, clean and flat. The adhesive force is reduced for thinner or painted steel sheet
metal.
Other sizes with adhesive forces up to 60 kg are available.
Order ID Ø Thread Adhesive strength
mm kg
319140.0100 25 M4 4.0
319140.0200 32 M4 8.0
319140.0300 40 M4 12.5
319140.0400 50 M4 22.0
319145 Pot magnet
Shielded, with threaded blind hole. Material: AlNiCo 500, painted red. Max. operating tempera-
ture: Magnet 450°C, paint 300°C. For installation in fixtures for holding, clamping, assembling, etc.
Other sizes are available.
Order ID Ø Toleranz 1 Height Toleranz 2 Thread Adhesive strength
mm mm N
319145.0100 17.5 ±0.2 16 ±0.2 M6 26
319145.0200 20.6 ±0.2 19 ±0.2 M6 40
319145.0300 27 ±0.2 25 ±0.2 M6 61
319145.0400 35 ±0.2 30 ±0.2 M6 147
319145.0500 65 ±1.0 43 ±1.0 M12 400

319148 Pot magnet with forcing screw
Shielded, with toggle forcing screw. Material: AlNiCo 500, painted red. Max. operating tempera-
ture: Magnet 450°C, paint 300°C. For lifting, holding, welding, assembly, etc.
Other sizes are available.
Order ID Ø Height Adaptor thread Adhesive strength
mm mm N
319148.0100 45 45 M8 200
319148.0200 55 49 M8 400

2412 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch