Page 2073 - Benma | Blue book 5.0

Cutting and hydraulic oils, coolant Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
419000 Cutting oil TAPMATIC
Ferrofluid
For steel, tough-hard steels, stainless steel, chrome-nickel steel, (not aluminium), for th-
read cutting, thread rolling, broaching, boring, drilling, milling, turning; cools and lubricates at
the same time, thus producing a clean cut and increasing the service life of the tools, prevents the
formation of built-up edges, meaning that the machining produces a smooth surface and tighter
tolerances can be maintained.
Order ID Contents Order ID Contents Order ID Contents
419000.0100 0.5 L 419000.0200 5 L 419000.0300 25 L
H phrases EUH210

419010 Cutting oil TAPMATIC
Aluminium fluid
For aluminium, for thread cutting, thread rolling, broaching, boring, drilling, milling, turning;
cools and lubricates at the same time, thus producing a clean cut and increasing the service life
of the tools, prevents the formation of built-up edges, meaning that the machining produces a
smooth surface and tighter tolerances can be maintained. Contains various high-pressure lubri-
cants and a special rust protection which takes effect on the metal surface by removing the mois-
ture from it, and leaving behind a long, effective protective film.
Order ID Contents Order ID Contents Order ID Contents
419010.0100 0.5 L 419010.0200 5 L 419010.0300 25 L
Symbols of danger GHS8
H phrases EUH066, H304
P phrases P301+P310, P331, P405

419040 Cutting oil MOTOREX
Swisscut Twin 300
All-purpose, chlorine-free, low oil mist high-performance cutting oil, outstanding suitability for
extremely difficult machining processes such as broaching, thread cutting, abrading, deep hole
drilling, slicing, milling, drilling, turning of CrNi tempered, case-hardened and structural steels,
titanium, non-ferrous and light metals.
Order ID Contents Order ID Contents Order ID Contents
419040.0100 1 L 419040.0200 5 L 419040.0300 25 L

419060 Cutting oil MOTOREX
Swisscut Inox 100
Low-viscosity chorine-free high-performance cutting oil of paraffin base oil and highly active ad-
ditives, outstanding suitability for machining of high-alloy steels such as manganese/silicon,
chrome/molybdenum, chrome/nickel, silicon, but also of titanium alloys, magnetic core
iron, ball bearing steel (100 Cr6) and other greasy or tough steels.
Order ID Contents
419060.0200 5 L
Symbols of danger GHS8
H phrases H304
P phrases P331, P301+P310, P405, P501

528200 Mineral thread cutter oil RIDGID
Made of mineral oil. Cools thread and pipe during use, improves thread quality, reduces torque.
Order ID Contents
528200.0100 600ml
528200.0200 5l
Symbols of danger F
H phrases R11
P phrases S16, S23, S38, S51

2062 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch