Page 1897 - Benma | Blue book 5.0

Workbench vices Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
313840 Parallel vice FUTURO
Quality vice, all forged steel construction, with hardened surface. With protected trapezoidal th-
read, adjustable guides and forged-on, corrugated clamping jaws, not interchangeable; forged-on
tube clamping jaws.
For swivel plates see 313845.
Order ID Jaw width Clamping width Clamping depth Weight
mm mm mm kg
313840.0100 100 127 55 5
313840.0200 120 150 70 9
313840.0300 140 200 87 16
313840.0400 160 227 107 26
313845 Swivel plate FUTURO
For Workbench vices 313840, swivels through 360°
Order ID for jaw width Weight
mm kg
313845.0100 100 1.5
313845.0200 120 2.5
313845.0300 140 3
313845.0400 160 5

314000 Clamping system SPANNFIX VARIO
Extremely universal clamping system. Ball can be rotated in any position and locked securely with
external thread for mounting numerous clamping accessories.
Order ID Type Designation
314000.0100 251 Clamping base with ball-and-socket joint, to hold the clamping
accessories, can be screwed onto workbenches with maximum worktop
thickness of 80 mm, external thread M12 x 1.5
314000.0150 261 Clamp foot with ball and socket joint, for permanent mounting, base
251 261
plate 150 x 105 mm with 4 bores, M 12 x 1.5 threaded ends. To hold
such items as monitors, surveillance cameras and measuring instruments,
flexible positioning for devices, stable
314000.0200 252 Vice, for bolting onto clamping base types 251 + 261, with plastic jaws
(replacement jaws 314050). Jaw width 50 mm, clamping width 70 mm,
clamping depth 38 mm, clamping pressure 150 kp
314000.0300 253 Printed circuit board holder, for bolting onto clamping base types 251
+ 261, if desired using angle adapter type 255 or rapid turning device type
257. Printed circuit boards are clamped firmly by springs integrated into
261 252 the locating webs. Clamping width 25 - 270 mm, clamping height 70
mm
314000.0400 256 Cover plate, for printed circuit boards populated with components;
for use with circuit board holder Type 253. Covered with 20mm-thick
foam. The components of various sizes are pressed in such a manner that
soldering is possible without any problems after the printed circuit board is
turned. Size 240 x 130 mm
253 255 314000.0600 255 Angular adapter, to be used as additional device for each working head;
allows still further turning circle
314000.0700 257 Rapid turning device, for use between clamping base Type 251 and cir-
cuit board holder Type 253 or 263. With integrated angle adapter, enables
quick rotation of the printed circuit board holder by 180° with or without
the cover plate

256 257
314020 Vice SPANNFIX
With ball-and-socket joint, can be rotated in all directions, can be locked in any position. Versi-
on for clamping to bench, max. benchtop thickness 80 mm.
314020.0100 with plastic jaws, corrugated
314020.0200 with steel jaws can be turned, one side smooth, the other corrugated
Replacement jaws see 314050.
Order ID Jaw width Clamping width Clamping depth Clamping force Weight
mm mm mm kN kg
314020.0100 50 70 38 1.5 1.5
314020.0200 100 100 50 3 4

1886 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch