Page 1900 - Benma | Blue book 5.0

Workbench vices Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
313910 Magnet vice jaws
of aluminium, with horizontal and vertical V-blocks for clamping of shafts, pins, tubes, etc.,
per pair.
Order ID Jaw width Order ID Jaw width
mm mm
313910.0100 80 313910.0400 135
313910.0200 100 313910.0500 150
313910.0300 125
313915 Magnet vice jaws
of high-strength polyurethane, furrowed, with permanent elasticity and clamping reliability, resis-
tant to cutting and abrasion, oil-resistant, do not harden or deform; even very sensitive surfaces can
be clamped without leaving scratches or bruises; with strong, screened magnetic clamp, per pair.
Order ID Jaw width Order ID Jaw width
mm mm
313915.0100 100 313915.0300 150
313915.0200 125 gentle clamping
313920 Magnet vice jaws
made of high-strength polyurethane, with horizontal and vertical prism notches, with perma-
nent elasticity and clamping reliability, resistant to cutting and abrasion, oil-resistant, do not harden
or deform; even very sensitive surfaces can be clamped without leaving scratches or bruises; with
strong, shielded magnetic clamp, per pair.
Order ID Jaw width Order ID Jaw width
mm mm
313920.0100 100 313920.0300 150
313920.0200 125
313945 Magnet vice jaws
of aluminium, with flutes for clamping of rough to medium fine workpieces, with strong, scree-
ned magnetic clamp, per pair.
Order ID Jaw width Order ID Jaw width
mm mm
313945.0100 100 313945.0300 150
313945.0200 125 313945.0400 160
313950 Magnet vice jaws
with abrasion-resistant elastic felt for clamping of highly sensitive workpieces, with strong,
screened magnetic clamp, per pair.
Order ID Jaw width Order ID Jaw width
mm mm
313950.0100 100 313950.0200 125
313955 Magnet vice jaws
of aluminium, with horizontal and vertical V-blocks, and a step for thin workpieces, with a strong,
screened magnetic clamp, per pair.
Order ID Jaw width Order ID Jaw width
mm mm
313955.0100 100 313955.0300 150
313955.0200 125 313955.0400 160
313960 Magnet vice jaws
with applied rubber support layer for clamping of shaped parts, thin-walled tubes and work-
pieces which must be held with low clamping pressure, with strong, screened magnetic clamp,
per pair
Order ID Jaw width Order ID Jaw width
mm mm
313960.0100 100 313960.0300 150
313960.0200 125 313960.0400 160
313965 Magnet vice jaws
with fibre support, for clamping of thin workpieces, and also headed pieces, with strong, scree-
ned magnetic clamp, per pair.
Order ID Jaw width Order ID Jaw width
mm mm
313965.0100 100 313965.0300 150
313965.0200 125 313965.0400 160

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1889