Page 1352 - Benma | Blue book 5.0

Saws / Circle cutters Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
359700 Diamond hole saw STARRETT
With diamond-coated cutting edge, ideal for clean cuts in abrasive materials; cuts glass, normal
and glass-reinforced plastic, Plexiglas, ceramic tiles, stone, and other abrasive substances (but not
steel or cast iron). Depth of cut 38mm, without arbor (see 359800), without pilot drill (see 359810
Type XA014C, carbide-coated).
Larger sizes can be supplied.
Available upon request: Hole saws with carbide teeth for hardwood, aluminium, fibreglass and
plastic can also be supplied.
Arbors see 359780 - 459840.
Order ID Ø Ø Order ID Ø Ø
mm in mm in
359700.0100 14 9/16“ 359700.2400 51 2“
359700.0200 16 5/8“ 359700.2500 52 2 1/16“
359700.0300 17 11/16“ 359700.2600 54 2 1/8“
359700.0400 19 3/4“ 359700.2700 56 2 3/16“
359700.0500 20 25/32“ 359700.2800 57 2 1/4“
359700.0600 21 13/16“ 359700.2900 59 2 5/16“
359700.0700 22 7/8“ 359700.3000 60 2 3/8“
359700.0800 24 15/16“ 359700.3100 64 2 1/2“
359700.0900 25 1“ 359700.3200 65 2 9/16“
359700.1000 27 1 1/16“ 359700.3300 67 2 5/8“
359700.1100 29 1 1/8“ 359700.3400 68 2 11/16“
359700.1200 30 1 3/16“ 359700.3500 70 2 3/4“
359700.1300 32 1 1/4“ 359700.3600 73 2 7/8“
359700.1400 33 1 5/16“ 359700.3700 76 3“
359700.1500 35 1 3/8“ 359700.3800 79 3 1/8“
359700.1600 37 1 7/16“ 359700.3900 83 3 1/4“
359700.1700 38 1 1/2“ 359700.4000 86 3 3/8“
359700.1800 40 1 9/16“ 359700.4100 89 3 1/2“
359700.1900 41 1 5/8“ 359700.4200 92 3 5/8“
359700.2000 43 1 11/16“ 359700.4300 95 3 3/4“
359700.2100 44 1 3/4“ 359700.4400 98 3 7/8“
359700.2200 46 1 13/16“ 359700.4500 102 4“
359700.2300 48 1 7/8“
359710 Drill bit diamond STARRETT
with diamond-tipped blade edge, suitable for processing concrete, marble, brick, aircrete, etc.,
Fastcut involving little effort. Cut depth 300 mm for diameters 22 mm and 28 mm, other sizes 150
mm cut depth.
Arbor see 359710
Order ID Ø Cutting depth Order ID Ø Cutting depth
mm mm mm mm
359710.0100 22 300 359710.0800 78 150
359710.0200 28 300 359710.0900 102 150
359710.0300 38 150 359710.1000 107 150
359710.0400 42 150 359710.1100 117 150
359710.0500 48 150 359710.1200 127 150
359710.0600 52 150 359710.1300 152 150
359710.0700 65 150

359712 Drill bit arbor STARRETT
for drill bits diamond 359710
When carbide and diamond-tipped hole saws are used, carbide-tipped pilot drills must be used
(359713)
Order ID Length Shank
mm
359712.0100 90 6-point
359712.0200 240 6-kt
359712.0300 90 SDS+
359712.0400 240 SDS+

359713 Pilot drill STARRETT
for drill bit arbor 359712 for drill bits diamond 359710
Order ID Length
mm
359713.0100 200
359713.0200 350
359714 Extension STARRETT
for drill bit arbors 359712.
Order ID Length
mm
359714.0100 150
359714.0200 250

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1339