Page 1357 - Benma | Blue book 5.0

Saws / Circle cutters Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
3 59880 Carbide multigrade hole saw RUKO
Design:
Hole saw and shank in one piece, sturdy construction, high rotational precision, regrindable tungs-
ten-carbide teeth, replaceable HSS Co 5 pilot drill, shank with 3 clamping flats.
Application:
For tubes and thin flat materials, curved surfaces; overlapped holes possible. Max. depth of cut 28
mm.Suitable for chrome alloy steels such as V2A and V4A, alloyed and unalloyed steels (up to 20
mm), non-ferrous metals and light metals, plastics (up to 28 mm).Can be used on magnetic and
standard drills to a maximum of 20 mm in steel. Can be used on hand-held drills to a maximum
of 6 mm in steel.
Instructions for use:
Not suitable for impact drilling. Drill with light and even pressure; avoid reciprocating (to and fro)
motions; keep to the speed table; use coolant.
For replacement pilot drills, see 359882. For cutting oils, see 419100 - 519150.
Other dimensions available upon request.
Order ID Ø Ø Tube dimensions Shaft Ø
mm in in mm
359880.0100 15 13
359880.0200 16 5/8“ 13
359880.0300 17 13
359880.0400 18 13
359880.0500 19 3/4“ 3/8“ 13
359880.0600 20 13
359880.0700 21 13
359880.0800 22 7/8“ 1/2“ 13
359880.0900 23 13
359880.1000 24 15/16“ 13
359880.1100 25 1“ 13
359880.1200 26 13
359880.1300 27 1 1/16“ 13
359880.1400 28 1 3/32“ 13
359880.1500 29 1 1/8“ 3/4“ 13
359880.1600 30 1 3/16“ 13
3 59882 Pilot drill RUKO
HSS Co 5, crosswise grind to DIN 1412 C, for carbide multigrade hole saws 359880.
Order ID Ø Length for Ø
mm mm mm
359882.0100 6 71 15...100

1344 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch