Page 1345 - Benma | Blue book 5.0

Saws / Circle cutters Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
360060 Cross shaft
for circle cutting tool VALCUT 460050, Type 3000, for other cutting areas, without single-point
tool (see 360130-360150),
Advantages of types 070-V5 to 3200-V5:
Here the tool forms the extreme outer end of the circle cutter (not the screw). This means cuts can
be made flush with a wall or through an existing borehole with the same diameter.
2050-V5 + 2050-5 Order ID Type Cutting area Length
mm mm
360060.0100 3070-V6 25...100 70
360060.0200 3120-V6 100...200 120
360060.0300 3070-5 25...100 70
360060.0400 3120-5 100...200 120
360060.0500 3200-5 200...300 200
360060.0600 3070-V5 25...100 70
360060.0700 3120-V5 100...200 120
360060.0800 3200-V5 200...300 200
360070 Holder
for cross shaft 360060, Valcut 3000, for efficient production of boreholes and grooves, per piece
(without cutter).
Order ID Type
360070.0100 3000-5
360070.0200 3000-V5
360070.0400 3111-5
360070.0500 3111-V5

360090 Circle cutting tool VALCUT 6000
Made in Switzerland, rugged construction, high precision thanks to neat, patented drag cut, also
suitable for bevelling and circular grooves; consists of pilot bit 360220 / 6060, setting ruler, in plas-
tic case. Without cross shaft (see 360100) and without tool (see 360150).
Circle cutting devices with cylinder shaft DIN 1835B W25, W32 and MK4/M16 are available at
short notice.
Order ID Shank
360090.0100 MK3/M12
360090.0200 MK4

360090 + 360100

360100 Cross shaft
for circle cutting tool VALCUT 360090, Type 6000, without single-point tool (see 360150-460200).
Advantages of types 6000-V and 8000-V:
Here the tool forms the extreme outer end of the circle cutter (not the screw). This means cuts can
be made flush with a wall or through an existing borehole with the same diameter.
Order ID Type Cutting area Length
2050-V5 + 2050-5 mm mm
360100.0100 6100-V6 40...140 100
360100.0200 6150-V6 140...240 150
360100.0300 6200-V6 200...300 200
360100.0400 6250-V6 250...400 250
360100.0500 6300-V6 300...500 300
360100.0600 6070-V8 78...100 70
360100.0700 6100-V8 40...140 100
360100.0800 6150-V8 140...240 150
360100.0900 6200-V8 200...300 200
360100.1000 6250-V8 250...400 250

1332 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch