Page 1279 - Benma | Blue book 5.0

Magnetic plates Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
3 15500 Small magnetic plate
switchable, used for erosion, in high-precision mechanics, in toolmaking, for detailed grinding
work or measuring operations.
Designs:
Type MMZ-614: ground on four sides
Order ID Type Length Outside Ø Width Height Adhesive strength
mm mm mm mm N
315500.0100 MMC-5 - 50 - 50 85
MMC-5...8 MMZ-614 315500.0200 MMC-8 - 80 - 65 500
315500.0450 MMZ-614 135 - 60 50 400
3 15560 Small magnetic clamping plate
With extra strong SamCo (samarium-cobalt) magnet, 2 holding surfaces (top surface and one
long side), cannot be switched on and off, with longitudinal pole pitch, for clamping of short,
narrow and thin parts. Base surface can be clamped to magnetic plate; clamps long, narrow and
thin parts; suitable for materials which are hard to clamp magnetically such as ferromagnetic
carbides; for erosion and grinding.
Magnetic field height 6 mm.
Order ID Length Width Height Pole dist. Machining depth Adhesive strength Weight
max.
mm mm mm mm mm N/cm² kg
315560.0100 75 43 38 3 / 4 5 100 1
315560.0200 100 43 38 3 / 4 5 100 1.5
3 15580 Small magnetic chuck
With extra strong SamCo (samarium-cobalt) magnet, 2 holding surfaces (top surface and one
long side), cannot be switched on and off, lateral pole pitch, base surface can be clamped to
magnetic plate; clamps long, narrow and thin parts; suitable for materials which are hard to
clamp magnetically such as ferromagnetic carbides; for erosion and grinding.
Magnetic field height 6 mm.
Order ID 315580.0100
Length mm 100
For carbide Width mm 25
Height mm 25
Pole distance mm 4
Adhesive strength N/cm² 180
Machining depth max. mm 6
Angle accuracy ± 5 sec.
Weight kg 0.5
3 15600 Small magnetic plate
With 3 adhesion surfaces (top surface and both long sides).
With extra strong SamCo (samarium-cobalt) magnet, 2 holding surfaces (top surface and one
long side), cannot be switched on and off, lateral pole pitch, base surface can be clamped to
magnetic plate; clamps long, narrow and thin parts; suitable for materials which are hard to
clamp magnetically such as ferromagnetic carbides; for erosion and grinding.
Magnetic field height 6 mm.
Order ID 315600.0100
for carbide Length mm 100
Width mm 50
Height mm 50
Pole distance mm 4
Adhesive strength N/cm² 180
Machining depth max. mm 14
Angle accuracy ± 5 sec.
Weight kg 1.7
3 15620 Laminated clamping blocks
for use in pairs on magnetic clamping plates, transfer the magnetic flux from the pole face so
that even workpieces above the pole face can be held and supported, also suitable for erosion.
Easy to machine for special shapes; segment pitch: 3 mm iron, 1.5 mm brass, without rivets. Preci-
sion: length and width ±1mm, height in pair ±0.1mm.
Order ID Type Length Width Height Angle
mm mm mm
315620.0100 SM1 60 35 15
315620.0200 SM4 100 60 25
315620.0300 SM6 50 70 35
315620.0400 SM8 60 70 50
315620.0500 SM9 60 75 30
315620.0600 SM10 50 100 25
315620.0700 SM11 70 100 50
315620.0800 SM21 60 70 50 90°
315620.0900 SM31 100 60 90 30° 60° 90°
315620.1000 SM32 100 100 100 45° 45° 90°
315620.1100 BL18 80 50 40
315620.1200 BL11 100 50 40
315620.1300 BL28 80 50 40 90°
315620.1400 BL21 100 50 40 90°

1270 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch