Page 1278 - Benma | Blue book 5.0

Magnetic plates Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
3 15000 Permanent magnetic clamping plate SAV
with narrow lateral pole pitch. Consistent holding force over the entire width and length. Fully
sealed. Suitable for grinding and EDM work.
Magnetic field height 6 mm.
Other sizes are available upon request.
Order ID Length Width Height Pole distance Adhesive strength Machining Weight
depth max.
mm mm mm mm N/cm² mm kg
315000.0100 175 100 49 1.9 80 8 7 Erosion, grinding
315000.0200 200 100 49 1.9 80 8 8
315000.0300 255 130 49 1.9 80 8 15
315000.0400 300 150 51 1.9 80 8 20
315000.0500 300 200 51 1.9 80 8 26
315000.0600 350 150 51 1.9 80 8 24
315000.0700 400 200 51 1.9 80 8 36
315000.0800 450 150 51 1.9 80 8 30
3 15020 Permanent magnetic clamping plate SAV
with narrow lateral pole pitch and extremely low construction, sealed.
Can be switched on/off from above, for EDM and grinding work.
Magnetic field height 6 mm.
Other sizes are available upon request.
Order ID 315020.0100 315020.0200 315020.0300 315020.0500
Length mm 150 175 250 300
Width mm 150 100 150 150
Height mm 34.5 32 34.5 34.5
Pole distance mm 1.9 1.9 1.9 1.9 Erosion, grinding
Adhesive strength N/cm² 80 80 80 80
Machining depth max. mm 6 6 6 6
Base plate mm 160 x 150 185 x 100 260 x 150 310 x 150
Weight kg 6 4.5 10 12.5
3 15250 Round permanent magnetic clamping chuck JB
Can be switched on/off using insert pin; for grinding and turning of flanges, discs, housings, etc.
Flanges W20/W25 and magnetic chuck available completely flanged at short notice.
Order ID Outside Ø Height Centring Ø Thread Pole distance Weight
mm mm mm mm kg
315250.0100 100 32 80 4 x M5 7 1.1
315250.0200 150 32 130 4 x M5 7 2.6
3 15270 Permanent circular magnet SAV
with very fine parallel pole pitch P = 1.9 mm.
Use:
For small and thin to medium-sized workpieces.
Version:
Powerful magnetic system with neodymium magnets and low magnetic field height. Magnetic
force infinitely adjustable.
Nominal holding force: 100 N/cm2
Magnetic field height: 8 mm
Pole plate wearing limit: 5 mm very low construction
Other dimensions are available upon request.
Order ID 315270.0120 315270.0220 315270.0320 315270.0420
Outside Ø mm 160 200 250 300
Height mm 57 57 57 62
Pole distance mm 1.9 1.9 1.9 1.9
Machining depth max. mm 5 5 5 5
Centring Ø mm 125 H7 mm x 4 150 H7 mm x 4 200 H7 mm x 4 250 H7 mm x 4
Thread 4 x M8 4 x M8 4 x M8 4 x M8
Partial arc Ø mm 142 180 232 285
Weight kg 9 15 20 31

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1269