Page 1256 - Benma | Blue book 5.0

Toggle clamps, pneumatic clamping ele- Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
262200 Table clamping device
For fast clamping of work pieces to machine tools, drill stands, etc. with T-grooves. Instantaneous
release through simple finger pressure, rotatable 360°, with 1 round articulated clamping jaw,
diameter 30 mm, blue baked enamel finish, without T-slot block.
Appropriate accessories:
260140 T-slot block
760510 Socket head cap screws fully threaded
Order ID Size Length Clamping capacity
mm mm
262200.0100 1GRI.13 280 0...75
262240 Push-pull type toggle clamp AMF
With small angle base, push rod and hand lever parallel.
Tension and pressure clamping device
Design
No. 6841, long push rod guide with fastening thread and nut. Zinc-plated and passivated. Rivet
made of stainless steel. Lever parts and push rod made of tempered steel, bearing positions grea-
sed. Handgrip of red, oil-resistant plastic, for size 2 with ergo-grip.
Scope of supply: Comes complete with tempered, zinc-plated clamping screw.
Order ID Size F1 F2 Height Length Screw
kN kN mm mm
262240.0100 0 0.8 0.8 47 66 M4 x 20
262240.0200 1 1 1 60 91 M4 x 20
262240.0300 2 2 2 95 114 M6 x 25
262240.0400 3 2.5 2.5 110 140 M8 x 35
262240.0500 5 4.5 4.5 126 171.5 M12 x 50
262260 Push-pull type toggle clamp AMF
Heavy design, push rod and hand lever parallel.
Tension and pressure clamping device
Design
No. 6842, with long push rod guide. Basic body made of tempered cast iron, lacquered. Lever parts
and push rod made of tempered steel, zinc-plated and passivated. Rivet made of stainless steel.
Bearing positions greased. Handgrip of red, oil-resistant plastic.
Scope of supply: Complete with tempered, zinc-plated pressing bolt.
Order ID Size F1 F2 Height Length Screw
kN kN mm mm
262260.0100 3 4 4 115 140 M8 x 35
262260.0200 5 10 10 134 172 M12 x 50
262260.0300 7 25 25 180 218 M12 x 50
262280 Hook type toggle clamp AMF
Simple shackle
Design
No. 6847, zinc-plated and passivated. Hardened for use and greased bearing bushes. Rivet made of
stainless steel. Hook and clamping sleeve tempered. Grip made of red, oil-resistant plastic.
Order ID Size F1 Height Travel adjustment
kN mm mm
262280.0100 1 2 34.5 8
262280.0200 3 3 36 12
262280.0300 5 5 68 14
262300 Counter catch
No. 6847G
Design
Zinc-plated and passivated. Bushes hardened for use. Stainless steel rivet.
Usable with:
262280 Hook type toggle clamp AMF
Order ID Size Height Length
mm mm
262300.0100 1 29 31
262300.0200 3 29 40
262300.0300 5 61 55

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1247