Page 1213 - Benma | Blue book 5.0

Turning jaws Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
249000 Three-jaw chuck RÖHM
Röhm 300 ZG cast.
DIN 6350, cylindrical centring receptacle
Design
Cast body made of special casting, one-piece jaws. Spiral ring drop-forged, balanced, hardened.
Screw-thread flanks ground on both sides. Lubrication via nipples.
Application
Proven and universally usable design on lathes, rotary tables, dividers, etc.
Normal accessories
1 set of drill jaws (externally graduated)
1 set of turning jaws (internally graduated)
1 chuck key, fastening screws
DIN 55029 Order ID Ø Order ID Ø Order ID Ø
mm mm mm
249000.0200 110 249000.0400 160 249000.0600 250
249000.0300 125 249000.0500 200
249010 Three-jaw chuck RÖHM
Röhm 600 ZG steel
DIN 6350, cylindrical centring receptacle
Design
Steel body and spiral ring drop-forged, standard balanced, hardened, screw-thread flanks ground
on both sides. Lubrication via nipples.
Application
Proven and universally usable design on lathes, rotary tables, dividers, etc.
Normal accessories
1 set of drill jaws (externally graduated)
1 set of turning jaws (internally graduated)
DIN 6350 1 chuck key, fastening screws
Order ID Ø Order ID Ø Order ID Ø
mm mm mm
249010.0100 80 249010.0300 160 249010.0500 250
249010.0200 125 249010.0400 200
249020 Three-jaw chuck RÖHM
Röhm 300 ZG cast
Design
already flanged W20 / W25
Cast body made of special casting, one-piece jaws. Spiral ring drop-forged, balanced, hardened.
Screw-thread flanks ground on both sides. Lubrication via nipples.
Application
For Schaublin machines.
Proven and universally usable design on lathes, rotary tables, dividers, etc.
Normal accessories
1 set of drill jaws (externally graduated)
1 set of turning jaws (internally graduated)
W20/W25 1 chuck key, fastening screws
Order ID Ø Holder Schaublin Adaptor thread
mm
249020.0100 85 W20 M37.6x3
249020.0300 110 W20 M37.6x3
249020.0400 110 W25 M47.6x3
249020.0500 125 W20 M37.6x3
249020.0600 125 W25 M47.6x3
249020.0700 160 W25 M47.6x3

249040 Three-jaw chuck RÖHM
Röhm 630 ZS steel
DIN 55029, with stud bolt for Camlock
Design
Steel body made of special casting, one-piece jaws. Spiral ring drop-forged, balanced, hardened.
Screw-thread flanks ground on both sides. Lubrication via nipples.
Application
Proven and universally usable design on lathes, rotary tables, dividers, etc.
Normal accessories
1 set of drill jaws (externally graduated)
1 set of turning jaws (internally graduated)
1 chuck key, fastening screws
DIN 55029 Order ID Ø Short cone size Order ID Ø Short cone size
Camlock mm mm
249040.0100 125 3 249040.0500 200 4
249040.0200 125 4 249040.0600 200 5
249040.0300 160 4 249040.0700 200 6
249040.0400 160 5 249040.0800 250 6

1204 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch