Page 1169 - Benma | Blue book 5.0

Floating tool holders Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
242000 Floating tool holders
PH / ER
Without internal cooling
Application:
This floating tool holder is ideal for reaming and tapping. With it, you can make holes of highly pre-
cise shape and dimensions. For vertical and horizontal work, and for clockwise and anticlockwise
turning. The tool is self-centring, so the float is always parallel to the rotational axis in horizontal ap-
plications. This makes it easy to start cuts and thus also results in a longer life for the cutting tools.
G= float
Package content: Floating tool holder with clamping nut and spanner.
Order ID 242000.0100 242000.0200
Ref PH 16 / ER 11 PH 20 / ER 11
Collet chucks ER11 ER11
G mm 0.8 0.8
D mm 22 22
D1 mm 16 h6 20 h6
D2 mm 38 38
L mm 36 36
L1 mm 34 34
Clamping capacity mm 0.5...7 0.5...7
Spanners E11AX E11AX
Nut ER11AX ER11AX
242020 Floating tool holder
PHC / ER
With internal cooling
Applications: Can be regulated continuously between self-centring and freely floating, therefore
no restriction of the float. Self-centring holds the cutting tool in the centre of the floating tool
holder, even in horizontal use.
G = float.
Package contents:Floating tool holder with clamping nut, clamping key and adjusting key.
Order ID 242020.0100 242020.0200 242020.0300
Ref PHC 16 / ER 20 PHC 20 / ER 20 PHC 25 / ER 20
Collet chucks ER20 ER20 ER20
G mm 1.0 1.0 1.0
D mm 33 33 33
D1 mm 16 h6 20 h6 25 h6
D2 mm 56 56 56
L mm 53.5 53.5 53.5
L1 mm 38 38 38
Clamping capacity mm 0.5...13 0.5...13 0.5...13
Spanners E20AX E20AX E20AX
Nut ER20AX ER20AX ER20AX
Order ID 242020.0400 242020.0500
Ref PHC 20 / ER 32 PHC 25 / ER 32
Collet chucks ER32 ER32
G mm 1.5 1.5
D mm 46 46
D1 mm 20 h6 25 h6
D2 mm 70 70
L mm 64.5 64.5
L1 mm 46 46
Clamping capacity mm 1...20 1...20
Spanners E32AX E32AX
Nut ER32AX ER32AX
242040 Mini-floating tool holder
MPH / ERM
Without internal cooling
Applications: Can be regulated continuously between self-centring and freely floating, therefore
no restriction of the float. Self-centring holds the cutting tool in the centre of the floating tool
holder, even in horizontal use.
G = float.
Package contents:Floating tool holder with clamping nut, clamping key and adjusting key
Order ID 242040.0100 242040.0200
Ref MPH 8 / ER 11 M MPH 10 / ER 11 M
Collet chucks ER11 ER11
G mm 0.5 0.5
D mm 16 16
D1 mm 8 h6 10 h6
D2 mm 25 25
L mm 35 35
L1 mm 42 42
Clamping capacity mm 0.5...7 0.5...7
Spanners E11M E11M
Nut Hi-Q / ER-M11 Hi-Q / ER-M11

1160 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch