Page 1168 - Benma | Blue book 5.0

Location taper (Morse taper, cyl. shank) Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
242600 Extension sleeve
Similar to DIN 2187
Design
Hardened on tab, outside taper ground true-to-gauge.
Order ID MT outside MT inside Ø Length
mm mm
242600.0100 1 1 20 145
242600.0200 1 2 30 160
242600.0300 2 1 20 160
242600.0400 2 2 30 175
242600.0500 2 3 36 200
242600.0600 3 1 20 175
242600.0700 3 2 30 194
242600.0800 3 3 36 215
242600.0900 3 4 48 240
242600.1000 4 2 30 215
242600.1100 4 3 36 240
242600.1200 4 4 48 265
242600.1300 4 5 63 300
242600.1400 5 3 36 268
242600.1500 5 4 48 300
242600.1600 5 5 63 335
242620 Reducing sleeve
With forcing nut, continuous, smooth bore holes, hardened, ground.
Thread:
MK3: M24 x 1.5
MK4: M32 x 1.5
MK5: M45 x 2
Order ID MT outside MT inside Order ID MT outside MT inside
242620.0100 3 1 242620.0500 4 3
242620.0200 3 2 242620.0600 5 2
242620.0300 4 1 242620.0700 5 3
242620.0400 4 2 242620.0800 5 4
242640 Ejector wedge
DIN 317, hardened steel, completely hardened.
Order ID Size for Morse taper Order ID Size for Morse taper
242640.0100 1 1 / 2 242640.0300 4 4
242640.0200 3 3 242640.0400 5 5 / 6
242660 Ejector wedge
Half-automatic, no hammer required, protects the spindle.
Order ID Size for Morse taper Order ID Size for Morse taper
242660.0100 1-3 1 / 2 / 3 242660.0200 4-6 4 / 5 / 6

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1159