Page 2021 - Benma | Blue book 5.0

Welding and soldering Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
410640 TIG welding rod BOEHLER
Böhler CN 23 / 12-IG, with increased ferrite content (FN ~16) in weld metal for combination of
and between high-strength, non-alloy and alloy tempered steels, stainless, ferritic Cr and austenitic
CrNi steels, Mn hard steels. Very good welding and flowing properties, approved for operating
temperatures up to 300° C.
Shielding gas: 100% argon.
Pack of 5 kg.
Order ID 410640.0300
Ø mm 2.0
Yield strength Re N/mm² >400
Tensile strength Rm N/mm² 550
Elongation A (L =5d ) 0 >30 %
0
Notch impact strength ISO-Av J 80
410680 TIG welding rod T-PUT
T-PUT UNION Al Mg 5, Aluminium welding filler for TIG welding of Al-Mg alloys.
Shielding gas: 100% argon.
In 5 kg pack.
Order ID 410680.0100 410680.0200 410680.0300
Ø mm 1.6 2.0 2.4
Tensile strength Rm N/mm² 235 235 235
Elongation A (L =5d ) 0 18 % 18 % 18 %
0
410801 MIG-MAG welding wire BÖHLER
Böhler Union SG 2-H, non-alloy, coppered wire electrode with a largely spatter-free material
interface, even under mixed gasses and CO2. For joint welding on non-alloy steels in boiler and
container construction and steelwork. Shielding gas (EN ISO 14175) M1 - M3 and C1, ideally
Argon +18% CO .
2
Order ID 410801.0200 410801.0300 410801.0400
Ø mm 0.8 1.0 1.2
Spool of kg 15 18 18
Yield strength Re N/mm² >430 >430 >430
Tensile strength Rm N/mm² 510 510 510
Elongation A (L =5d ) 0 >25 >25 >25%
0
Notch impact strength ISO-Av J >105 >105 >105
410811 MIG/MAG welding wire Böhler
Böhler Union SG 3-H, non-alloy, coppered wire electrode for welding of non-alloy steels with
higher strength requirements. Shielding gas (EN ISO 14175) M2, M3, C1, preferentially Argon
+ 18 % Co . 2
Order ID 410811.0100 410811.0200
Ø mm 0.8 1.0
Spool of kg 15 18
Yield strength Re N/mm² >440 >440
Tensile strength Rm N/mm² 550² 550
Elongation A (L =5d ) 0 >25 >25
0
Notch impact strength ISO-Av J >90 >90
410830 MIG/MAG welding wire BOEHLER
Böhler EAS 2-IG Si, high-alloy, chemically resistant solid wire for arc welding of CrNi steels. For
similar steels and ferritic 13% chromium steels. Outstanding sliding capacity and feed characte-
ristics. IC resistant up to 350°C operating temperature, tough down to -196°C. Shielding gas:
argon + max. 2.5% Co . 2
Order ID 410830.0100
Ø mm 0.8
Spool of kg 12.5
Yield strength Re N/mm² >350
Tensile strength Rm N/mm² 570
Elongation A (L =5d ) 0 >35 %
0
Notch impact strength ISO-Av J >75
410890 MIG/MAG welding wire T-PUT
T-PUT UNION Al Mg 5, Aluminium welding filler for MIG welding of Al-Mg alloys. Shielding gas:
100% argon.
Order ID 410890.0100 410890.0200
Ø mm 1.0 1.2
Spool of kg 7 7
Tensile strength Rm N/mm² 235 235
Elongation A (L =5d ) 18 % 18 %
0 0
411300 Co special pliers original FIX ®
2
with 4 functions: quick, dimensionally accurate cutting of the welding wire, time-saving cleaning
of the shielding gas nozzle, dressing of the shielding gas nozzle and loosening/tightening of the
contact tube.
Order ID Size for Ø
mm
411300.0100 1 12...15
411300.0200 2 15...18

2010 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch