Page 1769 - Benma | Blue book 5.0

Electrician‘s tools Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
350009 Crimping tool KNIPEX
Special steel, high-strength, burnished, with plastic sheaths. For cable cutting, stripping insulation
from wires and crimping insulated and uninsulated cable lugs, plug connectors and open-type plug
350009.0100 connectors. With threaded holes for cutting Cu or Ms set screws M 2.6 / 3.0 / 3.5 / 4.0 and 5.0 mm.
Order ID Original No. Designation
350009.0100 9721 215 for insulated cable lugs + plug connectors from 0.75...6.0 mm /
2
18...10 AWG
350009.0200 350009.0200 9721 215 B for uninsulated, open plug connectors (6.3 mm connector width)
2
from 0.5...2.5 mm / 10...13 AWG
350009.0300 9721 215 C for insulated cable lugs + plug connectors from 0.75...6.0 mm /
2
18...10 AWG
350009.0300
350012 Electrician‘s pliers KNIPEX
Knipex 1302, vanadium electric steel, forged, oil-hardened, atramentised black, head polished.
Precision cutting edges additionally inductively hardened, edge hardness approx. 60 HRC, for cut-
ting soft, medium-hard and hard wire. The ideal pliers for wiring work, for gripping and bending,
cutting, wire stripping and crimping.
Order ID Length for strands and Clamping range for medium-hard wire for hard wire
conductors
mm mm² mm² mm mm
350012.0100 160 0.5...0.75 / 1.5 0.5...2.5 2.5 1.6
/ 2.5
350015 Electrical installation pliers KNIPEX
Knipex 1392, special tool steel, forged, oil-hardened, precision cutting edges additionally induc-
tively hardened, atramentised black, head polished, handles with multicomponent sheaths.
6 functions in one pliers: Flat gripping surfaces at the tip for damage-free grouping of individual
wires; profile gripping surfaces and pipe grip for flat and round material; clear-cut outside edge on
the jaw for working on flush-mounted junction boxes and deburring feed-through holes; stripping
holes for conductors 0.7 - 1.5 m and 2.5 mm ; crimp die for wire end ferrules 0.5 - 2.5 mm ; cable
2
2
2
2
shears for Cu- and Al cables up to 5 x 2.5 mm / Ø 15 mm. Screwed hinge, slim design, opening
spring, intelligent latching mechanism with pawl, keeps the cutting edges closed while the other
functions are preserved.
Order ID Length for copper and alu cables Clamping range for strands and conductors
Ø
mm mm mm² mm²
350015.0100 200 15 0.7...1.5 + 2.5 0.5...2.5
350020 Wire end sleeve pliers C.K
In high alloy steel, hardened and tempered, brushed chrome-plated, with plastic handle sheaths.
Order ID Length Clamping range for AWG
mm mm²
350020.0100 145 0.25...2.5 23...13
350020.0200 220 0.5...16 20...5
350030 Crimping tool WEIDMÜLLER
for PVC, PC and polyamide insulated connectors of types:
- Cable lugs as per DIN 46237 and similar
- Terminal pins as per DIN 46231 and similar
- Parallel and serial connectors as per DIN 46341 and similar
- Plug connectors as per DIN 46245 and similar
Double crimp profile for crimping contact and insulation in a single work step, with stop, positive
closure with unlocking possibility, clear cross-section identification due to colour coding in red,
blue, yellow.
Order ID Type Clamping range for AWG Length
mm² mm
350030.0100 HTI 15 0.5...2.5 20...14 200

350030.0200 CTI 6 0.5...6 20...10 260
HTI 15
350035 Crimping tool KNIPEX
For insulated cable lugs and plug connectors. Chrome-vanadium electric steel, oil-hardened,
burnished. Crimping pressure is precisely set at the factory (calibrated), adjustable. Uniform high
crimping quality due to precision inserts and positive closure (can be unlocked). 3 crimping stations
with clear cross-section identification due to colour coding in red, blue and green.
Knipex 9752 36 short version, ergonomically shaped handles with multicomponent sheaths
9752 36
Knipex 9752 06 also for two-handed operation, with slip-resistant plastic sheaths
Order ID Original No. Clamping range for AWG Length
mm² mm
350035.0100 9752 36 0.5...6.0 20...10 220
350035.0200 9752 06 0.5...6.0 20...10 250
9752 06

1758 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch