Page 1759 - Benma | Blue book 5.0

Electronics and watchmaker‘s tools Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
348860 Component tweezers RUBIS
For assembly of circuit boards, for inserting and desoldering diagonal components. Surgical stain-
less steel, acid-resistant, non-rusting, anti-magnetic. Resistant to nitric and hydrofluoric acids.
Order ID Type for components Ø Jaw width Length
mm mm mm
348860.0100 583-SA 1 4 115
348860.0200 579-SA 1.3...2 4 115
348860.0300 573-SA 2.5...5 6 145
348880 Gripping tweezers RUBIS
Rubis 574-SA, for flat components. Surgical stainless steel, acid-resistant, non-rusting, anti-mag-
netic. Resistant to nitric and hydrofluoric acids.
Order ID Length Jaw width
mm mm
348880.0100 145 6
348900 Soldering tweezers RUBIS
Rubis 49E-SA, tips of epoxy resin glass, suitable for work where high temperatures are generated,
heat resistant to 155°C; surgical stainless steel, acid-resistant, non-rusting, anti-magnetic. Resis-
tant to nitric and hydrofluoric acids.
Order ID Length
mm
348900.0100 125
348910 Soldering tweezers RUBIS
Rubis 258 Peek, tips reinforced with 30% carbon fibres, ESD-safe, heat-resistant to 250°C (to
300°C for short periods), long-life because friction is minimal, soft and non-scratching; surgical
stainless steel, acid-resistant, non-rusting, anti-magnetic. Resistant to nitric and hydrofluoric acids.
Order ID Length
mm
348910.0100 125
348920 Precision tweezers RUBIS
Rubis FTP-SA, very precise and fine tips, all edges of the tips are rounded to prevent damage
to the components on printed circuit boards; surgical stainless steel, acid-resistant, non-rusting,
anti-magnetic. Resistant to nitric and hydrofluoric acids.
Order ID Length
mm
348920.0100 120

348950 SMD tweezers RUBIS
Rubis SMD-07, for inserting flat components at an angle of 60°; surgical stainless steel, acid-
resistant, non-rusting, anti-magnetic. Resistant to nitric and hydrofluoric acids.
Order ID Length angled
mm
348950.0100 120 60°
348960 SMD tweezers RUBIS
Rubis SMD-08, with tips corrugated on the inside, angled 45°, for inserting and soldering parts
1 mm wide. Surgical stainless steel, acid-resistant, non-rusting, anti-magnetic. Resistant to nitric
and hydrofluoric acids.
Order ID Length for components Ø
mm mm
348960.0100 120 ≤ 1

348980 SMD tweezers RUBIS
Rubis SMD-10, with tips corrugated on the inside, for inserting cubic chip capacitors. Surgical
stainless steel, acid-resistant, non-rusting, anti-magnetic. Resistant to nitric and hydrofluoric acids.
Order ID Length
mm
348980.0100 120
348990 SMD tweezers RUBIS
Rubis SMD-11, with tips corrugated on the inside, for inserting 5 mm chip capacitors with flat
base. Surgical stainless steel, acid-resistant, non-rusting, anti-magnetic. Resistant to nitric and hy-
drofluoric acids.
Order ID Length Tip length for capacitors
mm mm mm
348990.0100 120 2 5

1748 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch