Page 1583 - Benma | Blue book 5.0

Torque tools and torque testers Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
331700 Torque angle gauge STAHLWILLE
Stahlwille 7380 N, for attaching to the square of a torque wrench; for screw tightening controlled
by angle gauge.
Order ID Type Drive Setting range Division
331700.0100 7380 N 1/2“ q360° 2°
331550 Electromechanical torque and angle wrench
MANOSKOP® - indicating and cut-out
Click

STAHLWILL MANOSKOPn714 - indicating and cut-out:
- 4 measuring modes (torque, angle, torque backed up by angle, angle backed up by torque)
- high-resolution colour display with additional side-mounted indicator lamps
- freely configurable menu structure
- optional: lithium-ion battery No. 7195-2 and charger No. 7160
- 3 function modes: Cut-out, Peak (indicating mode with peak value) and Track (indicating mode
with current value)
- micro-USB interface
- bayonet lock for battery compartment
- QuickRelease safety lock change system for insert tools
- angle-controlled measurement without a reference arm
- data storage (≤2500 tightening jobs)
- as many as 200 joints can be programmed in up to 25 preset sequences
- different tolerance limits can be set for each joint
- acoustic and visual assessment of the joint
- rapid, accurate setting via keypad
- the automatic keypad lock prevents inadvertent changes
- overload protection by means of acoustic and visual signals and a fail-safe system (clockwise)
- automatic notification of the next calibration date, either by the number of joints or the time
interval
- fully automated calibrating and adjusting using the perfectControl calibrating and adjusting unit
No. 7794-2 (torque) or 7794-3 (torque and angle)
- units of measure: N·m, ft·lb, in·lb
- automatic compensation to achieve correct tightening torque even if a changed extension is
entered
- immediately reusable after release
- clockwise and anticlockwise tightening - it may be necessary to refit the insert tool rotated
through 180° for anticlockwise tightening in the Cut-out mode.
- tactile and acoustic trigger signal
- torque and angle are simultaneously visible
- readings are independent of the point of application of force (with sizes 1, 2 and 4)
- safe handling due to ergonomically designed handle (resistant to oils, grease, fuels, brake fluid
and Skydrol)
- 2 certificates (torque, angle)
- in sturdy plastic case (size 40-100 in steel case)
- design patent, patented
- supplied with SENSOMASTER Basic software, USB cable, 4 AAA/LR03 micro-batteries, 1,5 V. AAA,
1,2 V, micro NiMH rechargeable batteries can be used
- display resolution, angle 0,1°
- display deviation value, angle +/- 1 %, +/- 1 digit
- display resolution, torque ≤ 60 N·m: 0.01 N·m; > 60 N·m: 0,1 N·m
- display deviation value, torque +/- 2 %, +/- 1 digit
Order ID Type Range Plug connection Length Weight
Nm mm mm g
331550.0100 714/ 1 1..10 9 x 12 226 370
331550.0200 714/ 2 2...20 9 x 12 226 380
331550.0300 714/ 4 4...40 9...12 252 420
331550.0400 714/ 6 6...60 9 x 12 393 810
331550.0500 714/10 10...100 9 x 12 466 1085
331550.0600 714/20 20...200 14 x 18 547 1361
331550.0700 714/40 40...400 14 x 18 687 1765
331550.0800 714/65 65...650 22 x 28 890 3222
331550.0900 714/80 80...800 22 x 28 1158 4572
331550.1000 714/100 100...1000 22 x 28 1343 4990

1570 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch