Page 1409 - Benma | Blue book 5.0

Abrasive-, grinding and polishing tools Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
3 87205 Single-grain diamond dressing tool
Dressing diamond embedded in cylindrical steel shaft, block-shaped, firmly coalesced crystal
Economical form, hardly any inclusions, only a few, irregular hairline cracks, no open cracks. The dresser should
always be clamped in such a way that the angle to the centre of the abrasive disc is between 5°
and 15°. Dressing work with diamonds should preferably be done wet and with a large amount of
coolant. When the diamond becomes blunt, rotate it 90°.
Order ID Karat Shank for discs Ø
mm
387205.0100 0.25 Ø 8 x 80 ≤ 150
387205.0200 0.5 Ø 8 x 80 ≤ 300
387205.0300 0.75 Ø 8 x 80 ≤ 400
387205.0400 1 Ø 8 x 80 ≤ 500
3 87220 Multi-diamond hand dressing tool
with approx.20 diamonds, diamond carrier with 2 bores for lateral and frontal use.
Order ID Diamond coating
mm
387220.0100 38 x 10
3 87240 Multi-grain diamond dressing tool
DIAGLO-MAJOR with conical shaft
wear-resistant diamond coating with naturally-grown quality octahedral diamonds, for efficient
dressing and opening of medium to large abrasive wheels, maximum service life, always new dia-
mond tips being used, diamond coating can be completely used up.
Order ID Diamond coating Shank Grain for discs Ø for grain
mm mm
387240.0100 Ø 8 x 5 MK 1 1/3 ≤ 350 46...100
387240.0200 Ø 12 x 5 MK 1 1/3 ≤ 1000 46...100
3 87245 Multi-grain diamond dressing tool
Diamond grain sintered into conical steel shaft MK 1 with high concentration (approx. 2.5 ca-
rats), diamond cylinder embedded in shaft. Universal type for discs, grain 36...120. Efficient
Economical dressing tool for dressing only for straight disc surfaces (face and circumference). These dressers
are used straight with no inclination. Not suitable for profiling work. Adequate coolant feed before
and during the dressing process enables maximum service life.
Order ID Karat Grain Shank
387245.0100 2.5 36...120 MK 1

3 87250 Multi-grain diamond dressing tool DIAGLO
DIAGLO-MAJOR with straight shank
Wear-resistant diamond coating with naturally-grown quality octahedral diamonds, for efficient
dressing and opening of medium to large abrasive wheels, maximum service life, always new dia-
mond tips being used, diamond coating can be used up completely.
Order ID Diamond coating Shaft Grain for discs Ø for grain
mm mm mm
387250.0100 Ø 5 x 7 Ø 12 x 68 1/3 ≤ 200 46...100
387250.0200 Ø 8 x 5 Ø 12 x 68 1/3 ≤ 350 46...100
387250.0300 Ø 12 x 5 Ø 12 x 68 1/3 ≤ 1000 46...100
3 87255 Multi-grain diamond dressing tool
Diamond grain sintered into cylindrical steel shaft with high concentration (approx. 2.5 carats),
Economical diamond cylinder embedded in shaft. Universal type for discs, grain 36...120. Efficient dressing
tool for dressing only for straight disc surfaces (face and circumference). These dressers are used
straight with no inclination. Not suitable for profiling work. Adequate coolant feed before and
during the dressing process enables maximum service life.
Order ID Karat Grain Shaft
mm
387255.0100 2.5 36...120 Ø 10 x 80
3 87260 Multi-grain diamond dressing tool DIAGLO
DIAGLO 36
for frontal and lateral use. Diamond coating with high-quality diamond crystals, for dressing of
small and medium-sized abrasive wheels by and and machine-driven on tool grinding machines,
grinding supports, etc., maximum service life, always new diamond tips being used, diamond coa-
ting can be completely used up.
Order ID Grain Diamond coating Shaft for discs Ø for grain
mm mm mm
387260.0100 50 Ø 4 x 10 Ø 8 x 90 ≤ 150 60...120
387260.0200 100 Ø 4 x 10 Ø 8 x 90 ≤ 150 120...400

1396 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch