Page 1395 - Benma | Blue book 5.0

Abrasive-, grinding and polishing tools Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
383945 Abrasive bands PFERD
Ceramic oxide CO-COOL, for aggressive grinding with maximum stock removal on tough, hard
materials which do not conduct heat well. Active abrasive additives in the coating significantly im-
prove the stock removal rate, prevent clogging and allow cooler grinding. Recommended cutting
speed 15-20 m/s.For matching rubber drum holder, see 383790.
Stock package 100 pcs
Order ID Ø x width Grain Order ID Ø x width Grain
mm mm
383945.0100 15 x 30 60 383945.1200 30 x 30 80
Ceramic oxide 383945.0200 15 x 30 80 383945.1300 30 x 30 120
383945.0300 15 x 30 120 383945.1400 45 x 30 36
383945.0400 22 x 20 60 383945.1500 45 x 30 60
383945.0500 22 x 20 80 383945.1600 45 x 30 80
383945.0600 22 x 20 120 383945.1700 45 x 30 120
383945.0700 25 x 25 60 383945.1800 60 x 30 36
383945.0800 25 x 25 80 383945.1900 60 x 30 60
383945.0900 25 x 25 120 383945.2000 60 x 30 80
383945.1000 30 x 30 36 383945.2100 60 x 30 120
383945.1100 30 x 30 60
383960 Abrasive caps set POLICAP ®
containing abrasive caps 383850, 483860, 483890 (Forms A, C, G) in various dimensions and
grains, with abrasive cap holder 383750, 483760, 483780 (Forms A, C, G).
Order ID Type
383960.0100 PCS 285

384100 Non-woven brush SCOTCH-BRITE
3M PF-ZS
Aluminium oxide abrasive, shaft 6 mm, for use on power drills, die grinders, flexible cables
etc. Produces a very even surface with a dense scratch pattern and high shine with low surface
roughness. For fine work on flat surfaces and profiles, for cleaning, ideal on stainless steel in pres-
sure vessels and kitchen fittings, for cleaning work in containers and tanks used in the food and
beverage industry.
Order ID Ø x width Grain Recom. Speed
mm min -1
384100.0100 75 x 45 A Medium 6 500
384100.0200 75 x 45 A Very Fine 6 500
384100.0300 100 x 45 A Medium 4 800
384100.0400 100 x 45 A Very Fine 4 800

384110 Non-woven brush SCOTCH-BRITE
3M FF-ZS
Abrasives aluminium oxide (A, red), silicon carbide (S, grey), shaft 6 mm; for use on power
drills, die grinders, flexible cables etc. Especially for cleaning and finishing work on stainless steel
and non-ferrous metals. FF-ZS is a soft, adaptable brush for a fine finish; produces a fine, matt
scratch pattern.
Order ID Ø x width Grain Recom. Speed
mm min -1
384110.0100 75 x 45 A Coarse 4 000
384110.0200 75 x 45 S Fine 4 000
384110.0300 75 x 45 A Very Fine 4 000
384110.0400 100 x 45 A Coarse 3 200
384110.0500 100 x 45 S Fine 3 200
384110.0600 100 x 45 A Very Fine 3 200
384120 Combination non-woven brush SCOTCH-BRITE
3M CB-ZS
Combination shaft-mounted brush of non-woven material (aluminium oxide A-Fine) and abra-
sive flaps. Specially designed for surface work on stainless steel (INOX), aluminium, carbon steel
and non-ferrous metals. Removes surface defects, makes the scratch pattern uniformly directional;
non-woven material reduces the roughness of the scratches. Constant, reproducible work result;
no alteration to the shape of the workpiece.
Order ID Ø x width Grain Recom. Speed
mm min -1
384120.0100 75 x 45 60 4 000
384120.0200 75 x 45 80 4 000
384120.0300 75 x 45 120 4 000
384120.0400 75 x 45 180 4 000
384120.0500 100 x 45 60 3 200
384120.0600 100 x 45 80 3 200
384120.0700 100 x 45 120 3 200
384120.0800 100 x 45 180 3 200

1382 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch