Page 1287 - Benma | Blue book 5.0

Sine tables Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
3 16000 Sine table SAV
for grinding, EDM and measuring of precision workpieces at any angle position up to 45°; main
body of all-steel construction, hardened (60HRC) and precision-ground.
Supplied with magnetic clamping plate with fine pole pitch, sine table, in the wooden box.
Magnetic field height 6 mm.
Other plate sizes and designs are available upon request.
Order ID Clamping area Distance between axes Height at 0° Base plate Weight
mm mm mm mm kg
316000.0200 175 x 100 85 77 215 x 115 10
low construction 316000.0300 255 x 130 115 77 295 x 145 20.5
316000.0400 300 x 150 135 79 340 x 165 28
316000.0500 300 x 200 185 79 340 x 215 36
316000.0600 350 x 150 135 87 390 x 165 36
316000.0700 450 x 150 135 87 490 x 165 46
316000.0800 400 x 200 185 87 440 x 215 54
3 16020 Sine plate
for mounting magnetic plates, vices or other clamping units, hardened steel construction, with th-
readed holes, adjustable with angular dimensions, plane parallelism 0.008 mm/100 mm, angularity
0.008 mm/100 mm.
Order ID Clamping area Height Thread Swivel area Weight
mm mm kg
316020.0100 150 x 150 62 6 x 1 0...60° 8
3 16040 Precision sine table
For grinding with the use of magnetic plates, vices, etc.; all-steel construction, hardened and
ground, base plate with 45 threaded holes M6, grid 30 mm. Swivel range 0...60°, for use with
gauge blocks. Angularity ±5‘‘‘‘, plane parallelism ±0.008/100 mm.
Order ID Clamping area Height Thread Swivel area
mm mm
316040.0100 200 x 150 65 45 x M6 0...60°

3 16080 Precision double sine table
for grinding with the use of magnetic plates, vices, etc.; all-steel construction, hardened and
ground, base plate with 45 threaded holes M6, grid 30 mm. Swivel range on two sides 0...60°, for
use with gauge blocks. Angularity ±5“, plane parallelism ±0.008/100 mm.
Order ID Clamping area Height Thread Swivel area
mm mm
316080.0100 200 x 150 105 45 x M6 0...45°

3 16160 Sine table with vice PFL-S
Set consisting of sine table, rigid and precise design, very strong locking system, all important guide
surfaces hardened; with precision vice of hardened steel, ground, spindles hardened and ground,
stainless steel cover, standard accessories: adjustable reference gauges, tightening screw, set of
U-bolts, longitudinal stop, V-block with magnetic hold, wooden box.
Order ID 316160.0200
Type 150
Base plate mm 180 x 200
Baffle height mm 75
Jaw width mm 90
Angular spacing 360°
Vernier 5‘
Vice height mm 73
Swivel area 0...60°
Clamping depth mm 35
Clamping width mm 120

3 16180 Sine bar
Application: For adjusting and checking precise angles with gauge blocks according to the sine
principle. Special steel hardened and precision-ground. Workpiece stop on the face. In wooden
case.
Roller clearance and parallelism of the supporting surface for the roller support stand ±0.002 mm.
Order ID Roller centre distance
mm
316180.0101 100

1278 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch