Page 1243 - Benma | Blue book 5.0

Flat tension clamps, stop components Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
2 57740 Low type tenons AMF
No. 6322B, hardened for use.
These slot blocks are useful when a fixture is always used on the same machine.
Nominal dimension of the grooves:
b: for machine and fixture
Order ID b Thread h l
mm mm mm
257740.0100 10 M4 x 10 8 20
257740.0200 12 M5 x 12 8 20
257740.0300 14 M6 x 16 10 22
257740.0400 16 M6 x 16 10 22
257740.0500 18 M6 x 16 10 22
257740.0600 20 M6 x 16 10 22
257740.0700 22 M6 x 16 12 32
257740.0800 24 M6 x 16 12 32

2 57760 Loose-type precision tenon AMF
DIN 6323, case-hardened and ground.
Application
After rough alignment of fixture, these tenons are pushed into T-slot from the side, and always
remain with the machine. For small machines: 12 mm fixture slot, for large machines 20 mm
fixture slot.
Nominal dimensions of the grooves
b1: for machine
b2: for fixture
Order ID b1 b2 h h 1 l
mm mm mm mm mm
257760.0100 10 12 12 3.6 20
257760.0200 12 12 28.6 5.5 20
257760.0300 12 20 14 5.5 32
257760.0400 14 20 14 5.5 32
257760.0500 16 20 14 5.5 32
257760.0600 18 20 14 5.5 32
257760.0700 20 20 45.5 7 32
257760.0800 22 20 50.5 7 40
257760.0900 24 20 55.5 7 40
257760.1000 28 20 61.5 7 40
257760.1100 36 20 76.5 7 50

1234 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch