Page 1242 - Benma | Blue book 5.0

Flat tension clamps, stop components Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
257680 Precision angle stop AMF
No. 6353, ground and hardened for use. Guaranteed exactness of all stop surfaces to the groove
+/-30“.
The various angles make it possible to fix the workpiece parallel to the table groove or at 0, 30,
45, 60 or 90 degrees to it.
Order ID Size Grooves a b d e h l
mm mm mm mm mm mm mm
257680.0100 125 10...20 34 68 17 66.5 15 125
±0.01

257700 Stop piece AMF
No. 6328, steel ground and hardened for use, height tolerance +/-0.01 mm, thus usable as sup-
port, two lengths per groove size.
Groove tolerance: a-h6
Order ID Grooves l1 b d h l2 Screw
mm mm mm mm mm mm
257700.0100 12 15 ±0.01 12 -0.6 20 ±0.01 6 8 M6 x 25
257700.0200 12 25 ±0.2 12 -0.6 20 ±0.01 6 8 M6 x 35
257700.0300 14 25 ±0.01 14 -0.6 32 ±0.01 8 9 M8 x 35
257700.0400 14 50 ±0.2 14 -0.6 32 ±0.01 8 9 M8 x 60
257700.0500 16 25 ±0.01 16 -0.6 32 ±0.01 8 10 M8 x 45
257700.0600 16 50 ±0.2 16 -0.6 32 ±0.01 8 10 M8 x 70
257700.0700 18 25 ±0.01 18 -0.6 40 ±0.01 10 15 M10 x 50
257700.0800 18 50 ±0.2 18 -0.6 40 ±0.01 10 15 M10 x 75
257700.0900 22 25 ±0.01 20 -0.6 40 ±0.01 14 15 M10 x 55
257700.1000 22 50 ±0.2 20 -0.6 40 ±0.01 14 15 M10 x 80
257700.1100 28 25 ±0.01 22 -0.6 46 ±0.01 16 20 M12 x 60
257700.1200 28 50 ±0.2 22 -0.6 46 ±0.01 16 20 M12 x 90

257720 Fixed type tenons AMF
No. 6322A, ground and hardened for use.
Nominal dimension of the grooves:
b: for machines
Order ID b Appliance slot Thread h l
mm mm mm mm
257720.0100 10 20 M6 x 10 10 22
257720.0200 12 20 M6 x 10 10 22
257720.0300 14 20 M6 x 16 10 25
257720.0400 16 20 M6 x 16 10 25
257720.0500 18 20 M6 x 16 10 25
257720.0600 22 20 M6 x 16 12 32
257720.0700 24 20 M6 x 16 12 32
257720.0800 28 20 M6 x 16 12 32
257720.0900 36 20 M6 x 16 12 32

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1233