Page 1107 - Benma | Blue book 5.0

Knurling Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
376100 Knurled screw molding tool ZEUS
can be used on conventional and CNC lathes and turning machines
Tool is universally applicable as a right and left handed version. Convert
simply by turning the knurled head.
• Easy to use
Selection of knurling rollers:
• for feed knurling: 2 cogs AA
• for cross knurling: 1 cog each BL + BR
Appropriate spare parts:
761660.0990 Parallel pins st hard+ground tol h6 DIN 6325 / ISO - 6 x 20
Corresponding inserts:
376220 Knurling roller IFANGER
Delivered without knurled wheels.
Order ID Shaft Working range Wheel
mm mm mm
376100.0200 20 x 20 10...80 Ø 20 x 8 x 6
376130 CNC Form knurling tool ZEUS
can be used on conventional and CNC lathes and autolathes
Tool is universally applicable as a right and left version. Changeover is done
by simply rotating the knurl head.
• Knurl head with flexible centring
• Set screws in the shaft for freely correcting angles
• Carbide pins
• Special surface hardening for increased wear resistance
Knurling wheel selection:
• for feed knurling: 2 small wheels AA
• for axial and circumferential knurling: 1 small wheel each BL + BR
Appropriate spare parts:
761660.0990 Parallel pins st hard+ground tol h6 DIN 6325 / ISO - 6 x 20
Corresponding inserts:
376220 Knurling roller IFANGER
Supplied without knurling roller.
Order ID Shaft Working range Length Wheel
mm mm mm mm
376130.0100 20 x 20 10...80 130 Ø 20 x 8 x 6
376150 Knurler
Knurler with pivot arm and adjustable beams. Automatically adjusts itself to the tip height of
the lathe, therefore pressure-free lathe bearings.
• for longitudinal knurling: 2 rollers AA
• for cross knurling: 1 roller each BL + BR
Corresponding inserts:
376220 Knurling roller IFANGER
Supplied with 2 knurling rollers gradation 1.0 mm for cross knurls.
Order ID Shaft Ø for Ø Wheel
mm mm mm
376150.0100 20 x 15 0...75 Ø 20 x 8 x 6

376200 Knurling roller IFANGER
Knurling by deformation, HSS.10x4x4 mm (outside Ø x width x bore).
• AA straight: for longitudinal knurling
• BL 45° left-hand: for cross knurling (together with BR)
• BR 45° right-hand: for cross knurling (together with BL)
• GE 45°: For cross knurling with 1 roller
AA BL Appropriate tool holders:
376040 Knurler IFANGER
376050 Knurler IFANGER
Order ID Version Division Order ID Version Division
376200.0100 AA 0.4 376200.1100 BR 0.4
376200.0200 AA 0.5 376200.1200 BR 0.5
376200.0300 AA 0.6 376200.1300 BR 0.6
BR GE 376200.0400 AA 0.8 376200.1400 BR 0.8
376200.0500 AA 1.0 376200.1500 BR 1.0
376200.0600 BL 0.4 376200.1600 GE 0.4
376200.0700 BL 0.5 376200.1700 GE 0.5
376200.0800 BL 0.6 376200.1800 GE 0.6
376200.0900 BL 0.8 376200.1900 GE 0.8
376200.1000 BL 1.0 376200.2000 GE 1.0

1098 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch