Page 2827 - Benma | Blue book 5.0

Parts for machine construction Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
7 66610 Drawn cup needle roller bearings SKF
Drawn cup needle roller bearings with open ends type HK
Drawn cup needle roller bearings with open ends are needle roller bearings with a formed, thin-walled outer ring. Extremely low sectional height
and high load carrying capacity are their key features. They are primarily used where the housing bores cannot be used for needle roller and cage
assemblies and exceptionally space-saving and economical bearing arrangements are aimed for. They are press fit into the housing bore and
firmly seated. This way, if shoulders or snap rings are not needed for axial localisation, the housing bores can be made simply and economically.
The outer ring made of hardened sheet steel and the cage-guided needle roller and cage assembly constitute a self-retaining unit.
Main dimensions: ISO 3245:2007 / DIN 618-1:1993 / DIN 618-2:1993, as far as standardized
Suffixes:
RS Contact seal of acrylonitrile-butadiene rubber (NRB) on one side of the bearing
2RS Sheet steel reinforced contact seals of acrylonitrile-butadiene rubber (NBR) on both side
TN Injection moulded cage of polyamide 66, the cage is glass fibre reinforced

Order ID Type d D B Charge de base dyn. Charge de base stat. Vitesse limite
mm mm mm kN kN min -1
766610.0050 HK 0306 TN 3 6.5 6 1.23 0.88 26‘000
766610.0100 HK 0408 4 8 8 1.76 1.37 26‘000
766610.0150 HK 0509 5 9 9 2.38 2.08 24‘000
766610.0200 HK 0608 6 10 8 2.01 1.73 22‘000
766610.0250 HK 0609 6 10 9 2.81 2.7 22‘000
766610.0300 HK 0808 8 12 8 2.7 2.75 22‘000
766610.0350 HK 0810 8 12 10 3.69 4.05 22‘000
766610.0400 HK 0812.2RS 8 12 12 2.7 2.75 13‘000
766610.0450 HK 0908 9 13 8 3.52 3.9 20‘000
766610.0500 HK 1010 10 14 10 4.29 5.3 20‘000
766610.0550 HK 1012 10 14 12 5.39 6.95 20‘000
766610.0600 HK 1012 RS 10 14 12 4.29 5.3 12‘000
766610.0650 HK 1014.2RS 10 14 14 4.29 5.3 12‘000
766610.0700 HK 1015 10 14 15 6.6 9 20‘000
766610.0750 HK 1210 12 16 10 4.84 6.4 18‘000
766610.0800 HK 1212 12 18 12 6.27 7.35 18‘000
766610.0850 HK 1214 RS 12 18 14 6.27 7.35 10‘000
766610.0900 HK 1216.2RS 12 18 16 6.27 7.35 10‘000
766610.0950 HK 1312 13 19 12 6.6 8 17‘000
766610.1000 HK 1412 14 20 12 6.82 8.65 17‘000
766610.1050 HK 1416.2RS 14 20 16 6.82 8.65 9‘500
766610.1100 HK 1512 15 21 12 7.65 9.5 16‘000
766610.1150 HK 1516 15 21 16 10.1 14.6 16‘000
766610.1200 HK 1612 16 22 12 7.37 9.8 16‘000
766610.1250 HK 1616 16 22 16 10.5 15.6 16‘000
766610.1300 HK 1616.2RS 16 22 16 7.37 9.8 9‘000
766610.1350 HK 1622 16 22 22 12.8 19.6 16‘000
766610.1400 HK 1712 17 23 12 7.65 10.6 15‘000
766610.1450 HK 1812 18 24 12 7.92 11.2 15‘000
766610.1500 HK 1816 18 24 16 11.2 17.6 15‘000
766610.1550 HK 2010 20 26 10 6.16 8.5 14‘000
766610.1600 HK 2012 20 26 12 8.42 12.5 14‘000
766610.1650 HK 2016 20 26 16 12.3 20.4 14‘000
766610.1700 HK 2018 RS 20 26 18 12.3 20.4 8‘000
766610.1750 HK 2020 20 26 20 15.1 26.5 14‘000
766610.1800 HK 2020.2RS 20 26 20 12.3 20.4 8‘000
766610.1850 HK 2030 20 26 30 20.9 40.5 14‘000
766610.1900 HK 2212 22 28 12 8.8 13.7 12‘000
766610.1950 HK 2216 22 28 16 13 22.4 12‘000
766610.2000 HK 2220 22 28 20 15.7 29 12‘000
766610.2050 HK 2512 25 32 12 10.5 15.3 11‘000
766610.2100 HK 2516 25 32 16 15.1 24 11‘000
766610.2150 HK 2516.2RS 25 32 16 10.5 15.3 6‘700
766610.2200 HK 2520 25 32 20 19 32.5 11‘000
766610.2250 HK 2520.2RS 25 32 20 15.1 24 6‘700
766610.2300 HK 2526 25 32 26 24.2 45 11‘000
766610.2350 HK 2530.2RS 25 32 30 24.2 45 6‘700
766610.2400 HK 2538 25 32 38 33 65.5 11‘000
766610.2450 HK 2816 28 35 16 15.7 26.5 9‘500
766610.2500 HK 2820 28 35 20 20.1 36.5 9‘500
766610.2550 HK 3012 30 37 12 11.7 18.3 9‘000
766610.2600 HK 3016 30 37 16 16.5 29 9‘000
766610.2650 HK 3020 30 37 20 20.9 40 9‘000
766610.2700 HK 3026 30 37 26 27 54 9‘000

2816 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch